Description
The HVAC Modbus SL contains function blocks for Modbus communication. The library is designed for the CFC Editor. Via a master block (serial or TCP) “slave” devices are attached. Slave devices can be single Modbus queries or completely finished device blocks from many manufacturers. This simplifies the commissioning extremely!
The HVAC Modbus Library can be perfectly complemented with the decentralized powerIO® system, which is based on working with communicative Modbus sensors and actuators. Serial stations are immediately converted to TCP and can be queried via a CODESYS controller. Further information about the decentralized system under http://www.powerio.com.
The HVAC Modbus SL library runs independently from the CODESYS Modbus library. There is no need to use a controller with CODESYS Modbus library.
Detailed Wiki on www.hvac-automation.com.
In the HVAC Visu Library from the HVAC Building Automation Package SL there are Visu Frames matching the blocks.
Requirements
Programming system | CODESYS Development System V3.5.14.0 |
Runtime system | CODESYS Control V3.5.14.0 |
Supported platforms/devices | Tested devices: CODESYS Control Win V3, Raspberry Pi, Beagle Bone Black, WAGO PFC 200, Janztec emPC-a/iMX6 Notice: Use the project ‘Device Reader’ to find out the supported features of your device. ‘Device Reader’ is available for free in the CODESYS Store. |
Additional requirements | NO |
Restrictions | NO |
Licensing | License activation optional on CODESYS Key or CODESYS Soft Key. |
Required Accessory | - |
