Windows Archives - RN Embedded Solutions https://rnembedded.com/product-category/softplc/windows/ Tue, 27 Aug 2024 05:12:16 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.1 https://rnembedded.com/wp-content/uploads/2024/06/cropped-cropped-Embedded-Solutions-2-removebg-preview-32x32.png Windows Archives - RN Embedded Solutions https://rnembedded.com/product-category/softplc/windows/ 32 32 CODESYS Network License Server https://rnembedded.com/product/codesys-network-license-server/ Mon, 26 Aug 2024 09:50:20 +0000 https://rnembedded.com/?post_type=product&p=6600

Licensing made easy - CODESYS License Server for Linux allows users to set up a network license server on Linux devices and load licenses via web-based management.

Current version : 4.12.0.0
Article number : 000137

The post CODESYS Network License Server appeared first on RN Embedded Solutions.

]]>

The CODESYS LicenseServer for Linux package allows you to conveniently set up a license server on a Linux-based device and load licenses onto it. The network license server can be used to centrally license CODESYS controllers across the entire network.

Deployment is carried out conveniently via the CODESYS Development System. A network-capable version of Wibu Codemeter Runtime is installed on the target system. In order to be able to use the network license server, a plug-in for Redhat Cockpit is also provided, which allows users to activate application-based licenses on the server via a browser.

Requirements

Programming system CODESYS Development System V3.5.20.10 or higher
Runtime system CODESYS Virtual Control SL V4.12.0.0 or higher
Supported platforms Linux
Additional requirements No
restrictions No
Licensing Single device license: The license can be used on the controller on which the CODESYS runtime system is installed.

The license is activated on a software-based license container (soft container) that is permanently linked to the controller. Alternatively, the license can be stored on a CODESYS key (USB dongle). The license can be used on another controller by replugging the CODESYS key.

Required accessories none

The post CODESYS Network License Server appeared first on RN Embedded Solutions.

]]>
CODESYS Virtual Control SL https://rnembedded.com/product/codesys-virtual-control-sl/ Mon, 26 Aug 2024 09:46:20 +0000 https://rnembedded.com/?post_type=product&p=6598 Scalable, hardware-independent, easy to maintain, secure - with CODESYS Virtual Control SL, you can use the next generation of soft PLC on almost any x86- or ARM-based Linux device, with any number of instances and scalable performance.

Current version : 4.12.0.0
Article number  : 000138

The post CODESYS Virtual Control SL appeared first on RN Embedded Solutions.

]]>
Take the next step towards complete hardware independence! With CODESYS Virtual Control SL you use the next generation of IEC-61131-3 compatible CODESYS soft PLC. The containerized runtime can be operated on almost any x86 or ARM-based hardware. From compact standard controllers to IPCs and powerful IT servers.

The merging of the IT and OT worlds opens up new possibilities. Nothing stands in the way of centralizing the control landscape. Benefit from immense cost savings in hardware procurement, wiring, operation and maintenance. Easy scaling through dynamic creation of control instances and the ability to expand hardware independently of the software make you more flexible than ever before. Dividing the tasks between several independent, containerized control instances with powerful intercommunication increases security enormously. The possible use of IT methods, systems and orchestration also simplifies the maintenance of your virtual controls, from runtime updates to changing the application.

You can easily install and instantiate the CODESYS Virtual Control on your target system using the CODESYS Development System. Depending on the performance of the hardware used, potentially dozens of containerized runtime systems can be operated in parallel.

Requirements

Programming system CODESYS Development System V3.5.20.10 or higher
Runtime system CODESYS Virtual Control SL V4.12.0.0 or higher
Supported platforms Debian Linux, RedHat Enterprise Linux, Yocto Linux CPU: x86-64, ARM, ARM64
Additional requirements Support of a container engine required (Docker/Podman) Kernel version >= 5.10 (Debian 11 – OSADL Docker image) Python3, SSH server preinstalled Network license server accessible (CODESYS LicenseServer) Optimization of the real-time capability of the system: hardware, BIOS, RT-Preempt kernel, no graphical interface
restrictions No
Licensing Single device license: The license can be used on the controller on which the CODESYS runtime system is installed.

The license is activated on a software-based license container (soft container) that is permanently linked to the controller. Alternatively, the license can be stored on a CODESYS key (USB dongle). The license can be used on another controller by replugging the CODESYS key.

Note: Licensing is done through the application-based network licenses for controllers.

Required accessories CODESYS LicenseServer for Linux SL

The post CODESYS Virtual Control SL appeared first on RN Embedded Solutions.

]]>
CODESYS Control Win SL https://rnembedded.com/product/codesys-control-win-sl/ Mon, 06 May 2024 05:46:46 +0000 https://rnembedded.com/?post_type=product&p=4477

The CODESYS Control Win SL is an IEC 61131-3 Soft PLC for PC-based industrial controls under Windows with soft real-time properties.

Current version : 3.5.19.70
Article number : 2302000003-SW

The post CODESYS Control Win SL appeared first on RN Embedded Solutions.

]]>

The CODESYS Control Win SL turns an industrial PC into a universally applicable high-performance PLC – almost scalable via PC performance. The system is suitable for applications without tough real-time behaviour requirements and is also used in the building sector with the CODESYS KNX SL bookable.

The runtime system supports numerous I/O interfaces such as discrete input/output or fieldbus cards as well as integrated IEC 61131-3 protocol stacks. The fieldbuses are configured directly in the CODESYS Development System – without the use of additional tools.

Benefits

  • Communication with the CODESYS Development System
  • Loading, managing and executing the binary format application code compiled by CODESYS
  • Debugging of the application within CODESYS
  • Handling of I/O systems and fieldbuses
  • Execution of optional components (see section “Product options”)
  • Support of remanent data: hard disk, flash card, battery-buffered SRAM card

Interfaces

  • CODESYS OPC UA Server, as a full version for data exchange.

Fieldbus support

With the delivery of the runtime package the following fieldbuses are supported:

  • CODESYS CANopen Manager / Device
  • CODESYS EtherCAT Master
  • CODESYS EtherNet/IP Scanner / Adapter
  • CODESYS J1939
  • CODESYS Modbus TCP master / Slave
  • CODESYS Modbus Serial Master / Slave
  • CODESYS PROFIBUS Master
  • CODESYS PROFINET Controller / Device
  • CODESYS Sercos III Master
These fieldbuses require an installed Npcap. This product therefore includes software developed by the Computer Systems Engineering Group at Lawrence Berkeley Laboratory.

Product options

The product can be expanded by the following paid product options:

  • CODESYS BACnet SL
  • CODESYS KNX SL
  • CODESYS Redundancy SL
  • CODESYS SoftMotion SL
  • CODESYS SoftMotion CNC+Robotics SL
  • CODESYS TargetVisu
  • CODESYS WebVisu

Detailed information can be found in the CODESYS Online Help.

Requirements

Programming system

CODESYS Development System V3.5.17.0 or higher

Supported platforms/devices

Runs on Windows 10 / 11 / Embedded (32 / 64 Bit)

The versions are supported.

Note: Use the Device Reader tool to determine the functions supported by the controller (free part of the CODESYS Development System).

Additional requirements

--

Limitations

soft real-time properties: within the tolerance range, the time can be frequently exceeded and rarely severely exceeded.

Not suitable for use in containers or virtual machines (VMs)!

Licensing

Single device license: The license can be used on the controller on which the CODESYS runtime system is installed.


The license activation is done on a software-based license container (soft container), which is permanently bound to the control system. Alternatively, the license can be stored on a CODESYS key (USB dongle). By redefining the CODESYS Key, the license can be used on another controller.

Note: Without a license, the software runs in demo mode for two hours. Then a manual restart is required.

Required accessories

Optional: CODESYS Key

The post CODESYS Control Win SL appeared first on RN Embedded Solutions.

]]>
CODESYS Control RTE SL (for Beckhoff CX) https://rnembedded.com/product/codesys-control-rte-sl-for-beckhoff-cx/ Mon, 06 May 2024 05:34:07 +0000 https://rnembedded.com/?post_type=product&p=4474

CODESYS Control RTE SL is a real-time-capable software PLC for PC-based industrial controllers under Windows - programmable according to IEC 61131-3 with the development environment CODESYS.

Current version : 3.5.19.70
Article number : 2302000001

The post CODESYS Control RTE SL (for Beckhoff CX) appeared first on RN Embedded Solutions.

]]>

The product CODESYS Control RTE SL is a real-time software PLC for PC-based industrial controllers under Windows. The runtime system has its own real-time kernel, which enables deterministic behavior with jitter in the area without additional hardware components or operating system extensions.

Interfaces

  • CODESYS OPC UA Server

The following CAN PCI cards are supported:

  • Peak PCI: PCIe, MiniPCIe
  • Ixxat: SJA1000 (PCI card)
  • Automata: all PCI cards (1- and 2-channel)

Fieldbus support

With the delivery of the runtime package the following fieldbuses are supported:

  • CODESYS CANopen Manager / Device
  • CODESYS EtherCAT Master
  • CODESYS EtherNet/IP Scanner / Adapter
  • CODESYS J1939
  • CODESYS Modbus TCP Master / Slave
  • CODESYS Modbus Serial Master / Slave
  • CODESYS PROFIBUS Master
  • CODESYS PROFINET Controller / Device
  • CODESYS Sercos III Master

Product options

The product can be expanded with the following paid options:

  • CODESYS SoftMotion SL
  • CODESYS SoftMotion CNC+Robotics SL
  • CODESYS WebVisu SL
  • CODESYS TargetVisu SL

Detailed information can be found in the CODESYS Online Help.

Requirements

Programming system

CODESYS Development System V3.5.17.0 or higher

Supported platforms/devices

OS: Windows 8 / 10 / Embedded CPU: x86 (single core), x64 (multi core)

The versions are supported.

Note: Use the Device Reader tool to determine the functions supported by the controller (free part of the CODESYS Development System).

Additional requirements

--

Limitations

The following CAN PCI cards are supported: - Peak PCI: PCIe, MiniPCIe (SJA1000-based) - Ixxat: SJA1000 (PCI card) - Automata: all PCI cards (1- and 2 channel)

The following Ethernet chipsets are supported: - Realtek - Intel

Sercos III Master: only 32bit supported

Not suitable for use in containers or virtual machines (VMs)!

Licensing

Single device license: The license can be used on the controller on which the CODESYS runtime system is installed.


The license activation is done on a software-based license container (soft container), which is permanently bound to the control system. Alternatively, the license can be stored on a CODESYS key (USB dongle). By redefining the CODESYS Key, the license can be used on another controller.

Note: Without a license, the software runs in demo mode for two hours. Then a manual restart is required.

Required accessories

Optional: CODESYS Key

The post CODESYS Control RTE SL (for Beckhoff CX) appeared first on RN Embedded Solutions.

]]>
CODESYS Control RTE SL https://rnembedded.com/product/codesys-control-rte-sl/ Mon, 06 May 2024 05:09:24 +0000 https://rnembedded.com/?post_type=product&p=4468

CODESYS Control RTE SL is a real-time-capable software PLC for PC-based industrial controllers under Windows - programmable according to IEC 61131-3 with the development environment CODESYS.

Current version : 3.5.19.70
Article number : 2302000000

The post CODESYS Control RTE SL appeared first on RN Embedded Solutions.

]]>

The product CODESYS Control RTE SL is a real-time software PLC for PC-based industrial controllers under Windows. The runtime system has its own real-time kernel, which enables deterministic behavior with jitter in the area without additional hardware components or operating system extensions.

Interfaces

  • CODESYS OPC UA Server 1)
  • The following CAN PCI cards are supported:
    • Peak PCI: PCIe, MiniPCIe
    • Ixxat: SJA1000 (PCI card)
    • Automata: all PCI cards (1- and 2-channel)
    • Innodisk: PCIe CAN adapter
    • HMS: passive CAN cards

1) The performance of a local OPC UA connection from the RTE to an OPC UA client on the same host system is severely limited and cannot be further optimized due to the system.

Fieldbus support

With the delivery of the runtime package the following fieldbuses are supported:

  • CODESYS CANopen Manager / Device
  • CODESYS EtherCAT Master
  • CODESYS EtherNet/IP Scanner / Adapter
  • CODESYS J1939
  • CODESYS Modbus TCP Master / Slave
  • CODESYS Modbus Serial Master / Slave
  • CODESYS PROFIBUS Master
  • CODESYS PROFINET Controller / Device
  • CODESYS Sercos III Master

Product options

The product can be expanded with the following paid options:

  • CODESYS SoftMotion SL
  • CODESYS SoftMotion CNC+Robotics SL
  • CODESYS WebVisu SL
  • CODESYS TargetVisu SL

Detailed information can be found in the CODESYS Online Help.

Requirements

Programming system

CODESYS Development System V3.5.17.0 or higher

Supported platforms/devices

OS: Windows 10 / 11 / IoT Enterprise : 32Bit / 64Bit : 2 or more cores

The versions are supported.

Note: Use the Device Reader tool to determine the functions supported by the controller (free part of the CODESYS Development System).

Additional requirements

--

Limitations

The following CAN PCI cards are supported:

  • Peak PCI: PCIe, MiniPCIe (SJA1000-based)

  • Ixxat: SJA1000 (PCI card)

  • Automata: all PCI cards (1- and 2-channel)

  • Innodisk: PCIe CAN adapter

  • HMS: passive CAN cards

The following Ethernet chipsets are supported:

  • Realtek

  • Intel (Pro1000 Compatible)

Sercos III Master: only 32bit supported.

The following Hilscher hardware is supported:

  • PROFIBUS Master: Hilscher CIFX or netX 100/500 Controller with firmware 2.8.0.0

  • PROFINET Controller: Hilscher CIFX or netX 100/500 controller with firmware 3.x

Not suitable for use in containers or virtual machines (VMs)!

Licensing

Single device license: The license can be used on the controller on which the CODESYS runtime system is installed.


The license activation is done on a software-based license container (soft container), which is permanently bound to the control system. Alternatively, the license can be stored on a CODESYS key (USB dongle). By redefining the CODESYS Key, the license can be used on another controller.

Note: Without a license, the software runs in demo mode for two hours. Then a manual restart is required.

Required accessories

Optional: CODESYS Key

The post CODESYS Control RTE SL appeared first on RN Embedded Solutions.

]]>