DC Eletronic Loads Archives - RN Embedded Solutions https://rnembedded.com/product-category/dc-eletronic-loads/ Tue, 23 Jul 2024 09:28:22 +0000 en-US hourly 1 https://wordpress.org/?v=6.8 https://rnembedded.com/wp-content/uploads/2024/06/cropped-cropped-Embedded-Solutions-2-removebg-preview-32x32.png DC Eletronic Loads Archives - RN Embedded Solutions https://rnembedded.com/product-category/dc-eletronic-loads/ 32 32 2516B https://rnembedded.com/product/bk-precision-2516b/ Fri, 29 Mar 2024 09:10:18 +0000 https://rnembedded.com/?post_type=product&p=3267 Model 2516B
2510B Series
200 MHz, 1 GSa/s, Isolated Handheld Digital Storage Oscilloscope
3 yr Warranty

[forminator_form id="4078"]

The post 2516B appeared first on RN Embedded Solutions.

]]>

The 2510B Series handheld digital storage oscilloscopes combine floating measurement and recorder capabilities with a built-in digital multimeter (DMM), all in one portable and lightweight package. These versatile 100 MHz and 200 MHz bandwidth scopes provide two channels with 1 GSa/s sample rates, 12 Mpts memory depth, 38 automatic measurements, and multiple recording functions to capture transient or long-term signal behavior. Models 2515B and Model 2516B B&K Precision offer full isolation between both the oscilloscope channels, the multimeter channel, the power input, and the USB host and device ports.

  • 100 MHz and 200 MHz bandwidth
  • 1 GSa/s sample rate
  • Fully isolated 1000 V CAT II and 600 V CAT III input rating (models 2515B / 2516B)
  • Non-isolated 300 V CAT II input rating (models 2511B / 2512B)
  • 12 Mpts memory depth
  • Serial bus decoding for IIC, SPI, UART, CAN, and LIN protocols
  • FFT plus 7 additional math functions
  • Built-in 6000-count DMM measures DC/AC voltage, DC/AC current, resistance, capacitance, diode, and continuity test
  • Recorder and trend plot functions to log data
  • USB host port for convenient storing and recalling of waveform data, setups, and screenshots on a USB flash drive
  • Standard micro-USB device port for remote PC control
  • Model 2516B B&K Precision

The post 2516B appeared first on RN Embedded Solutions.

]]> 8602 https://rnembedded.com/product/8602-2/ Thu, 28 Mar 2024 11:19:10 +0000 https://rnembedded.com/?post_type=product&p=3207 Model 8602
8600 Series
200 W Programmable DC Electronic Load
yr Warranty

[forminator_form id="3975"]

The post 8602 appeared first on RN Embedded Solutions.

]]>

The 8600/B Model 8602 BK Precision Series programmable DC electronic loads provide the performance of modular system DC electronic loads in a compact benchtop form factor. With fast transient operation speeds up to 25 kHz, and high 16-bit measurement resolution and accuracy, these DC loads can be used for testing and evaluating a variety of DC sources such as DC power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays.

The DC electronic loads can operate in constant current (CC), constant voltage (CV), constant resistance (CR), and constant power (CW) mode. This series provides flexible triggering capabilities, analog current control and monitoring, and standard USB (USBTMC-compliant) or RS232 serial interfaces for remote communication. GPIB is available as an option on select models.

  • Wide voltage and current range, 0 to 500 V, 0 to 240 A
  • CC/CV/CR/CW operating modes
  • Transient mode up to 25 kHz
  • 16-bit resolution voltage and current measurement
  • List mode function
  • Adjustable slew rate in CC mode
  • Short circuit test
  • Built-in battery test function with voltage level, capacity level, and timer stop conditions
  • CR-LED mode to simulate the loading behavior of typical LEDs
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Analog current control and monitoring
  • Standard USB (USBTMC-compliant) and RS232 interfaces with SCPI protocol support
  • GPIB optional on select models
  • OVP/OCP/OPP/OTP and local/remote reverse voltage (LRV/RRV) protection
  • Model 8602 BK Precision

The post 8602 appeared first on RN Embedded Solutions.

]]> MDL4U400 https://rnembedded.com/product/bk-precision-mdl4u400-2/ Thu, 28 Mar 2024 11:11:44 +0000 https://rnembedded.com/?post_type=product&p=3205 Model MDL4U400
MDL4U Series
Programmable DC Electronic Load Module 400 W / 80 V / 60 A
3 yr Warranty

The post MDL4U400 appeared first on RN Embedded Solutions.

]]> The MDL4U Model MDL4U400 B&K Precision Series is a multi-channel modular programmable electronic load system. Seven different modules of programmable DC loads ranging in power from 200 W to 600 W provide users the flexibility to test a wide range of power sources from multi-output DC power supplies to batteries, fuel cells, and photovoltaic arrays.
The mainframe has four slots that can be configured with any assortment of the modules up to 2400 W (up to 4800 W with mainframe extension). The high-performance electronic load modules of the MDL4U Series are capable of operating in constant current (CC), constant voltage (CV), constant resistance (CR), and constant power (CW) mode, which uses DSP technology to simulate non-linear loads and realistic loading behavior.
  • Modules offer wide voltage and current range, 0 to 500 V, 0 to 120 A
  • Support for up to 4 modules/8 channels or 8 modules/16 channels with mainframe extension
  • Transient mode up to 25 kHz
  • Synchronous Load on/off function
  • Adjustable slew rate in CC mode
  • Standard LAN, GPIB, USB, and RS232 interfaces with USBTMC/SCPI protocol support
  • Short circuit test simulates a short at the input
  • Built-in 16-bit resolution voltage and current measurement (0.1 mV, 0.01 mA)
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Operate identical modules in parallel mode for high current applications
  • OVP/OCP/OPP/OTP and reverse voltage protection
  • Model MDL4U400 B&K Precision
 Mainframe Mainframe Extension Modules
| Model  | MDL4U001  | MDL4U002  | MDL4U200  | MDL4U252*  | MDL4U302*  | MDL4U305  | MDL4U400  | MDL4U505  | MDL4U600
| Power  | up to 2400 W total  | up to 2400 W total  | 200 W  | 250 W/50 W  | 300 W/300 W  | 300 W  | 400 W  | 500 W  | 600 W
| Voltage  | n/a  | n/a  | 80 V  | 80 V  | 80 V  | 500 V  | 80 V  | 500 V  | 80 V
| Current  | n/a  | n/a  | 40 A  | 20 A  | 45 A  | 20 A  | 60 A  | 30 A  | 120 A
| Inputs  | n/a  | n/a  | 1  | 2  | 2  | 1  | 1  | 1  | 1

*The MDL4U252 and MDL4U302 are dual-channel modules. MDL4U252 users can allocate 250 W to either channel up to 300 W total (e.g. 50 W/250 W, 250 W/50 W, 150 W/150 W). MDL4U302 users can allocate 300 W to either channel up to 600 W total (e.g. 300 W/300 W).

MDL Series (non-4U) modules are not compatible with newer MDL4U Series mainframe model MDL4U001 or mainframe extension model MDL4U002.

The post MDL4U400 appeared first on RN Embedded Solutions.

]]> MDL4U302 https://rnembedded.com/product/bk-precision-mdl4u302-2/ Thu, 28 Mar 2024 11:06:59 +0000 https://rnembedded.com/?post_type=product&p=3204 Model MDL4U302
MDL4U Series
Programmable DC Electronic Load Module 300 W / 80 V / 45 A
3 yr Warranty

[forminator_form id="4137"]

The post MDL4U302 appeared first on RN Embedded Solutions.

]]> The MDL4U Model MDL4U302 B&K Precision Series is a multi-channel modular programmable electronic load system. Seven different modules of programmable DC loads ranging in power from 200 W to 600 W provide users the flexibility to test a wide range of power sources from multi-output DC power supplies to batteries, fuel cells, and photovoltaic arrays.
The mainframe has four slots that can be configured with any assortment of the modules up to 2400 W (up to 4800 W with mainframe extension). The high-performance electronic load modules of the MDL4U Series are capable of operating in constant current (CC), constant voltage (CV), constant resistance (CR), and constant power (CW) mode, which uses DSP technology to simulate non-linear loads and realistic loading behavior.
  • Modules offer wide voltage and current range, 0 to 500 V, 0 to 120 A
  • Support for up to 4 modules/8 channels or 8 modules/16 channels with mainframe extension
  • Transient mode up to 25 kHz
  • Synchronous Load on/off function
  • Adjustable slew rate in CC mode
  • Standard LAN, GPIB, USB, and RS232 interfaces with USBTMC/SCPI protocol support
  • Short circuit test simulates a short at the input
  • Built-in 16-bit resolution voltage and current measurement (0.1 mV, 0.01 mA)
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Operate identical modules in parallel mode for high current applications
  • OVP/OCP/OPP/OTP and reverse voltage protection
  • Model MDL4U302 B&K Precision
 Mainframe Mainframe Extension Modules
| Model  | MDL4U001  | MDL4U002  | MDL4U200  | MDL4U252*  | MDL4U302*  | MDL4U305  | MDL4U400  | MDL4U505  | MDL4U600
| Power  | up to 2400 W total  | up to 2400 W total  | 200 W  | 250 W/50 W  | 300 W/300 W  | 300 W  | 400 W  | 500 W  | 600 W
| Voltage  | n/a  | n/a  | 80 V  | 80 V  | 80 V  | 500 V  | 80 V  | 500 V  | 80 V
| Current  | n/a  | n/a  | 40 A  | 20 A  | 45 A  | 20 A  | 60 A  | 30 A  | 120 A
| Inputs  | n/a  | n/a  | 1  | 2  | 2  | 1  | 1  | 1  | 1

*The MDL4U252 and MDL4U302 are dual-channel modules. MDL4U252 users can allocate 250 W to either channel up to 300 W total (e.g. 50 W/250 W, 250 W/50 W, 150 W/150 W). MDL4U302 users can allocate 300 W to either channel up to 600 W total (e.g. 300 W/300 W).

MDL Series (non-4U) modules are not compatible with newer MDL4U Series mainframe model MDL4U001 or mainframe extension model MDL4U002

The post MDL4U302 appeared first on RN Embedded Solutions.

]]> 8540 https://rnembedded.com/product/bk-precision-8540/ Thu, 28 Mar 2024 10:59:43 +0000 https://rnembedded.com/?post_type=product&p=3199 Model 8540
150 W DC Electronic Load
1 yr Warranty

[forminator_form id="4084"]

The post 8540 appeared first on RN Embedded Solutions.

]]> The Model 8540 B&K Precision DC electronic load is a very compact, economically priced instrument that is at home on both the bench and the production floor. Though this is an instrument in a small package, it can reliably test a 5 volt power supply to 30 amps and do it continuously. The load can operate in CC, CV or CR mode while voltage/current or resistance/power values are measured and displayed in real time, making it well suited to test a variety of DC power sources. The 8540’s performance is comparable to most full size bench DC electronic loads, yet it does the job at half the price and takes up half the space on your bench.

  • Operates between 0-60 VDC, 1 mA-30 A (150 W maximum)
  • Easy operation
  • Bright, easy-to-read display
  • Very compact and light weight
  • Two current ranges: 3 A (1 mA resolution) and 30 A (10 mA resolution)
  • Constant current (CC), constant resistance (CR) and constant voltage (CV) operation
  • Over-current and over-voltage protection
  • Short mode to simulate shorts
  • Save up to 400 instrument settings
  • Model 8540 B&K Precision

Get improved accuracy, PC connectivity, and more programming modes with B&K Precision’s new 8500B Series DC electronic loads. For more information click here.

The post 8540 appeared first on RN Embedded Solutions.

]]> 8550 https://rnembedded.com/product/bk-precision-8550/ Thu, 28 Mar 2024 10:56:37 +0000 https://rnembedded.com/?post_type=product&p=3194 Model 8550
8550 Series
175 W Programmable DC Electronic Load
3 yr Warranty

[forminator_form id="4087"]

The post 8550 appeared first on RN Embedded Solutions.

]]> The Model 8550 B&K Precision Series DC electronic loads provide many features and capabilities typically found in performance instruments, at a value price. Capable of sinking 350 W in a compact benchtop form factor, this series is well equipped for testing and evaluating power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays.
Configurable list, transient, and automatic test modes offer dynamically changing load conditions for evaluating a variety of DC sources. The dedicated battery discharge mode simplifies battery testing.
  • High power density, up to 350 W in compact 2U half-rack form factor
  • Transient mode up to 20 kHz in CC mode
  • CC/CV/CR/CW operating modes
  • Front panel remote sense
  • List mode programming
  • Automatic test mode
  • Overvoltage (OVP), overcurrent (OCP), Overpower (OPP) protection, remote reverse voltage (RRV), and key-lock function
  • Thermostatically-controlled fans for quiet operation
  • Short-circuit test
  • Configurable battery discharge test
  • CR-LED mode to simulate the loading behavior of typical LEDs
  • Adjustable voltage/current slew rate
  • Front panel USB host port for logging measurement data
  • Operating software and battery test software provided
  • RS232 and Handler interfaces
  • Model 8550 B&K Precision

The post 8550 appeared first on RN Embedded Solutions.

]]> 8542B https://rnembedded.com/product/bk-precision-8542b/ Thu, 28 Mar 2024 10:49:33 +0000 https://rnembedded.com/?post_type=product&p=3189 Model 8542B
8500B Series
150 W Programmable DC Electronic Load
3 yr Warranty

[forminator_form id="4085"]

The post 8542B appeared first on RN Embedded Solutions.

]]> The 8500B Model 8542B B&K Precision Series programmable DC electronic loads improve upon all aspects of its predecessor while maintaining dependability at a value price. This series supports both SCPI and the backwards compatible legacy protocol.

With a transient mode speed of up to 10 kHz and multi-type input terminals for banana plug or spade connectors, these DC loads are suitable for testing and evaluating DC power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays.

  • Maximum input power up to 1500 W
  • CC/CV/CR/CW operating modes
  • Transient mode up to 10 kHz in CC mode
  • 16-bit voltage and current measurement system with up to 0.1 mV / 0.1 mA resolution
  • List mode and adjustable slew rate in CC mode
  • Short circuit test
  • Built-in battery test function with voltage level, capacity level, and timer stop conditions
  • CR-LED mode to simulate the loading behavior of typical LEDs
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Analog current control and monitoring
  • TTL (DB9) interface, includes TTL to USB adapter (models 8542B, 8500B, 8502B, 8510B)
  • USB and RS232 interfaces (8514B only)
  • OVP/OCP/OPP/OTP and local/remote reverse voltage (LRV/RRV) protection
  • Model 8542B B&K Precision

Get faster operating speed and more PC interface options with B&K Precision’s 8600 Series DC electronic loads.

The post 8542B appeared first on RN Embedded Solutions.

]]> MDL200 https://rnembedded.com/product/bk-precision-mdl200/ Thu, 28 Mar 2024 10:21:40 +0000 https://rnembedded.com/?post_type=product&p=3188 Model MDL200
MDL Series
Programmable DC Electronic Load Module
3 yr Warranty

[forminator_form id="4120"]

The post MDL200 appeared first on RN Embedded Solutions.

]]> The MDL Model MDL200 B&K Precision Series is a multi-channel modular programmable electronic load system. Seven different modules of programmable DC loads ranging in power from 200 W to 600 W provide users the flexibility to test a wide range of power sources from multi-output AC/DC power supplies to batteries, fuel cells, and photovoltaic arrays.

The mainframe has four slots that can be configured with any assortment of the modules up to 2400 W (up to 4800 W with mainframe extension). The high-performance electronic load modules of the MDL Series are capable of operating in constant current (CC), constant voltage (CV), constant resistance (CR), constant power (CW), and constant impedance (CZ) mode, which uses DSP technology to simulate non-linear loads and realistic loading behavior.

  • Modules offer wide voltage and current range, 0 to 500 V, 0 to 120 A
  • Support for up to 4 modules/8 channels or 8 modules/16 channels with mainframe extension
  • Transient mode up to 25 kHz
  • Synchronous Load on/off function
  • Adjustable slew rate in CC mode
  • Standard LAN, GPIB, USB, and RS-232 interfaces with USBTMC/SCPI protocol support
  • Short circuit test
  • Built-in 16-bit resolution voltage and current measurement (0.1 mV, 0.01 mA)
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Operate identical modules in parallel mode for high current applications
  • OVP/OCP/OPP/OTP and reverse voltage protection
  • Model MDL200 B&K Precision
Mainframe  Mainframe Extension Modules
Model MDL001 MDL002 MDL200 MDL252* MDL302* MDL305 MDL400 MDL505 MDL600
Power up to 2400 W total up to 2400 W total 200 W 250 W/50 W 300 W/300 W 300 W 400 W 500 W 600 W
Voltage n/a n/a 80 V 80 V 80 V 500 V 80 V 500 V 80 V
Current n/a n/a 40 A 20 A 45 A 20 A 60 A 30 A 120 A
Inputs n/a n/a 1 2 2 1 1 1 1
*The MDL252 and MDL302 are dual-channel modules. MDL252 users can allocate 250 W to either channel up to 300 W total (e.g. 50 W/250 W, 250 W/50 W, 150 W/150 W). MDL302 users can allocate 300 W to either channel up to 600 W total (e.g. 300 W/300 W).

The post MDL200 appeared first on RN Embedded Solutions.

]]> 8551 https://rnembedded.com/product/bk-precision8551/ Thu, 28 Mar 2024 10:19:20 +0000 https://rnembedded.com/?post_type=product&p=3183 Model 8551
8550 Series
350 W Programmable DC Electronic Load
3 yr Warranty

[forminator_form id="4088"]

The post 8551 appeared first on RN Embedded Solutions.

]]> The 8550 Model 8551 B&K Precision Series DC electronic loads provide many features and capabilities typically found in performance instruments, at a value price. Capable of sinking 350 W in a compact benchtop form factor, this series is well equipped for testing and evaluating power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays.
Configurable list, transient, and automatic test modes offer dynamically changing load conditions for evaluating a variety of DC sources. The dedicated battery discharge mode simplifies battery testing.
  • High power density, up to 350 W in compact 2U half-rack form factor
  • Transient mode up to 20 kHz in CC mode
  • CC/CV/CR/CW operating modes
  • Front panel remote sense
  • List mode programming
  • Automatic test mode
  • Overvoltage (OVP), overcurrent (OCP), Overpower (OPP) protection, remote reverse voltage (RRV), and key-lock function
  • Thermostatically-controlled fans for quiet operation
  • Short-circuit test
  • Configurable battery discharge test
  • CR-LED mode to simulate the loading behavior of typical LEDs
  • Adjustable voltage/current slew rate
  • Front panel USB host port for logging measurement data
  • Operating software and battery test software provided
  • RS232 and Handler interfaces
  • Model 8551 B&K Precision

The post 8551 appeared first on RN Embedded Solutions.

]]> 8600B https://rnembedded.com/product/bk-precision-8600b/ Thu, 28 Mar 2024 10:15:56 +0000 https://rnembedded.com/?post_type=product&p=3178 Model 8600B
8600 Series
150 W Programmable DC Electronic Load without GPIB
3 yr Warranty

[forminator_form id="4092"]

The post 8600B appeared first on RN Embedded Solutions.

]]> The Model 8600B B&K Precision Series programmable DC electronic loads provide the performance of modular system DC electronic loads in a compact benchtop form factor. With fast transient operation speeds up to 25 kHz, and high 16-bit measurement resolution and accuracy, these DC loads can be used for testing and evaluating a variety of DC sources such as DC power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays.

The DC electronic loads can operate in constant current (CC), constant voltage (CV), constant resistance (CR), and constant power (CW) mode. This series provides flexible triggering capabilities, analog current control and monitoring, and standard USB (USBTMC-compliant) or RS232 serial interfaces for remote communication. GPIB is available as an option on select models.

  • Wide voltage and current range, 0 to 500 V, 0 to 240 A
  • CC/CV/CR/CW operating modes
  • Transient mode up to 25 kHz
  • 16-bit resolution voltage and current measurement
  • List mode function
  • Adjustable slew rate in CC mode
  • Short circuit test
  • Built-in battery test function with voltage level, capacity level, and timer stop conditions
  • CR-LED mode to simulate the loading behavior of typical LEDs
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Analog current control and monitoring
  • Standard USB (USBTMC-compliant) and RS232 interfaces with SCPI protocol support
  • GPIB optional on select models
  • OVP/OCP/OPP/OTP and local/remote reverse voltage (LRV/RRV) protection
  • Model 8600B B&K Precision

The post 8600B appeared first on RN Embedded Solutions.

]]>