60 V Archives - RN Embedded Solutions

8540

admin — Thu, 28 Mar 2024 10:59:43 +0000

The Model 8540 B&K Precision DC electronic load is a very compact, economically priced instrument that is at home on both the bench and the production floor. Though this is an instrument in a small package, it can reliably test a 5 volt power supply to 30 amps and do it continuously. The load can operate in CC, CV or CR mode while voltage/current or resistance/power values are measured and displayed in real time, making it well suited to test a variety of DC power sources. The 8540’s performance is comparable to most full size bench DC electronic loads, yet it does the job at half the price and takes up half the space on your bench.

Operates between 0-60 VDC, 1 mA-30 A (150 W maximum)
Easy operation
Bright, easy-to-read display
Very compact and light weight
Two current ranges: 3 A (1 mA resolution) and 30 A (10 mA resolution)
Constant current (CC), constant resistance (CR) and constant voltage (CV) operation
Over-current and over-voltage protection
Short mode to simulate shorts
Save up to 400 instrument settings
Model 8540 B&K Precision

Get improved accuracy, PC connectivity, and more programming modes with B&K Precision’s new 8500B Series DC electronic loads. For more information click here.

The post 8540 appeared first on RN Embedded Solutions.

1623A

admin — Tue, 26 Mar 2024 10:52:44 +0000

Continuously monitor voltage and current output on two digital meters
Connect two supplies in parallel to double the current output
Connect two supplies in series to double the voltage output
New compact style
Reliable, Durable
Operate continuously at full load without overheating
Fully overload protected
Coarse and fine voltage controls
Great regulation
Very low ripple
Constant voltage or constant current operation

The post 1623A appeared first on RN Embedded Solutions.

1667

admin — Tue, 26 Mar 2024 10:28:39 +0000

The 1665, 1666, and 1667 switching DC power supplies use new switching technologies to offer more power at a lower cost than traditional linear power supplies.

Constant voltage (CV) operation
Constant current (CC) operation (current limiting)
Bright easy-to-read LED displays
Overvoltage protection

The post 1667 appeared first on RN Embedded Solutions.

9110

admin — Tue, 26 Mar 2024 09:36:43 +0000

Model 9110 B&K Precision and 9111 are a new type of power supply. Unlike conventional power supplies with fixed output ratings, they automatically recalculate voltage and current limits for each setting, providing any Volt/Amp combination within the rated power. By providing greatly expanded choices of maximum power Volt/Amp combinations, users can cut down on the number of power supplies required and free up valuable bench space.

Output rating up to 180 W within 60 V/ 8 A (model 9111) or 100 W within 60 V/ 5 A (model 9110)
Digitally controlled, multi-ranging output
10mV/1mA resolution over the full range
Bright, easy to read display
Very compact and lightweight
Low ripple and noise
OCP, OVP and OTP protection
Output On/Off control
Store and Recall 4 x 100 groups of preset Volt/Amp values
Model 9110 B&K Precision

The post 9110 appeared first on RN Embedded Solutions.

1685B

admin — Tue, 26 Mar 2024 09:32:11 +0000

The Model 1685B B&K Precision, 1687B, and 1688B switching mode DC power supplies provide various configurations of high output voltage or high output current in a small, lightweight form factor. In addition to their constant voltage (CV) and constant current (CC) modes, these high efficiency DC power supplies offer unique preset and remote control modes. Up to three different presets of voltage and current values can be saved for quick recall through a rear switch. For remote control, an analog remote control terminal is accessible on the rear, or use the USB interface to communicate with the power supply via PC software or remote commands. These features make the Model 1685B B&K Precision, 1687B, and 1688B suitable for a wide range of applications including production testing, telecommunications, R&D, electronic field service, and university labs.

Automatic CV/CC crossover operation
Lightweight and compact
Rotary encoder control for precise voltage and current setting
3 user-defined voltage and current presets
USB interface with PC software for remote control and external timed programming
Analog remote control function
Overvoltage, overtemperature, and overload protection

The post 1685B appeared first on RN Embedded Solutions.

1698B

admin — Tue, 26 Mar 2024 07:46:27 +0000

The 1696B, 1697B, and Model 1698B B&K Precision programmable DC power supplies deliver exceptional cost/watt value with several programming and protection features. This series improves upon previous models with increased display accuracy, simplified programming, and a USB interface with added support for basic SCPI commands. PC software is provided for timed list mode programming and data logging.

Well suited for R&D, service, production testing, and education environments all models are equipped with overvoltage protection (OVP), overcurrent protection (OCP), and overtemperature protection (OTP).

Automatic CV/CC crossover operation
Store up to 10 voltage and current combinations for quick output
Lightweight and compact
Built-in voltage, current, and power meter
List mode (timed programming): program up to 20 steps
USB and RS485 interfaces
Control up to 31 power supplies from one PC through RS485, any combination of models
Protection features: Over voltage (OVP), Over current (OCP), Over Temperature (OTP), and key-lock function
Thermostatically-controlled fan (linear-speed control to minimize fan noise)
PC software included for remote control, test sequence generation, and data logging
Model 1698B B&K Precision

The post 1698B appeared first on RN Embedded Solutions.

9111

admin — Tue, 26 Mar 2024 07:26:13 +0000

Models 9110 and Model 9111 B&K Precision are a new type of power supply. Unlike conventional power supplies with fixed output ratings, they automatically recalculate voltage and current limits for each setting, providing any Volt/Amp combination within the rated power. By providing greatly expanded choices of maximum power Volt/Amp combinations, users can cut down on the number of power supplies required and free up valuable bench space.

Output rating up to 180 W within 60 V/ 8 A (model 9111) or 100 W within 60 V/ 5 A (model 9110)
Digitally controlled, multi-ranging output
10mV/1mA resolution over the full range
Bright, easy to read display
Very compact and lightweight
Low ripple and noise
OCP, OVP and OTP protection
Output On/Off control
Store and Recall 4 x 100 groups of preset Volt/Amp values
Model 9111 B&K Precision

The post 9111 appeared first on RN Embedded Solutions.

1715A

admin — Tue, 26 Mar 2024 07:18:39 +0000

Continuously monitor voltage and current output on two 4 digit LED displays
Connect two supplies in parallel to double the current output
Connect two supplies in series to double the voltage output
Reliable, Durable
Operate continuously at full load without overheating
Fully overload protected
Coarse and fine voltage controls
Excellent regulation
Very low ripple
Constant voltage or constant current operation

The post 1715A appeared first on RN Embedded Solutions.

1737

admin — Tue, 26 Mar 2024 06:01:53 +0000

The B&K Precision model 1737 is a general purpose dual range DC power source. This power supply has two ranges and can output higher voltage at a lower current range or higher current at a lower voltage range. The Model 1737 B&K Precision provides a 0-30 V, 0-3 A range and a 0-60 V, 0-2 A range. Voltage and current are both adjustable with coarse and fine control knobs. Two large LED meters continuously monitor the output voltage and current. The power supply can be operated locally from the front panel or remotely through the RS-232 interface.

Low ripple and noise
Excellent regulation
Constant voltage (CV) and constant current (CC) operation
Two large, easy-to-read LED displays provide good visibility in bright or low light
LED indication for CV and CC modes
Automatic recall of last settings on power up
RS-232 interface
Isolated output
Overload protection
Reverse polarity protection

The post 1737 appeared first on RN Embedded Solutions.

1902B

admin — Mon, 25 Mar 2024 12:20:20 +0000

Models 1900B, 1901B, and Model 1902B B&K Precision are laboratory grade switching mode DC power supply with high current output in a small form factor and lightweight package. The supplies provide various configurations of high output voltage or high output current and make setting voltage and current levels fast and precise through its dual action, coarse/fine rotary encoder control. In addition to constant voltage (CV) and constant current (CC) modes, the high efficiency DC power supplies offer a unique solution with its preset and remote control modes. Save up to three different presets of voltage and current values for quick recall. The remote control function allows the output power, voltage, and current to be adjusted without touching the front panel of the power supply. A remote sensing terminal is also available (model 1900B only) for use to compensate for long output line losses. These features make the 1900B Series suitable for a wide range of applications including production testing, telecommunications, R&D, service, and university labs.

Automatic CV/CC crossover operation
Lightweight and compact
Rotary encoder control for precise voltage and current setting
3 user-defined voltage and current presets
USB interface with PC software for remote control and external timed programming
Analog remote control function
Overvoltage, overtemperature, and overload protection
Remote sense (model 1900B only)

Ordering Information: Base models 1900B, 1901B, and Model 1902B B&K Precision operate with 110 V input only. For 220 V operation, request model 1900B-220V, 1901B-220V, or 1902B-220V at time of order.

The post 1902B appeared first on RN Embedded Solutions.