600 W Archives - RN Embedded Solutions

8510B

admin — Thu, 28 Mar 2024 06:45:20 +0000

The 8500B Model 8510B B&K Precision Series programmable DC electronic loads improve upon all aspects of its predecessor while maintaining dependability at a value price. This series supports both SCPI and the backwards compatible legacy protocol.

With a transient mode speed of up to 10 kHz and multi-type input terminals for banana plug or spade connectors, these DC loads are suitable for testing and evaluating DC power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays.

Maximum input power up to 1500 W
CC/CV/CR/CW operating modes
Transient mode up to 10 kHz in CC mode
16-bit voltage and current measurement system with up to 0.1 mV / 0.1 mA resolution
List mode and adjustable slew rate in CC mode
Short circuit test
Built-in battery test function with voltage level, capacity level, and timer stop conditions
CR-LED mode to simulate the loading behavior of typical LEDs
Remote voltage sensing to compensate for the effect of voltage drop in wires
Analog current control and monitoring
TTL (DB9) interface, includes TTL to USB adapter (models 8542B, 8500B, 8502B, 8510B)
USB and RS232 interfaces (8514B only)
OVP/OCP/OPP/OTP and local/remote reverse voltage (LRV/RRV) protection
Model 8510B B&K Precision

The post 8510B appeared first on RN Embedded Solutions.

MDL4U600

admin — Thu, 28 Mar 2024 06:12:18 +0000

The MDL4U Model MDL4U600 B&K Precision Series is a multi-channel modular programmable electronic load system. Seven different modules of programmable DC loads ranging in power from 200 W to 600 W provide users the flexibility to test a wide range of power sources from multi-output DC power supplies to batteries, fuel cells, and photovoltaic arrays.

The mainframe has four slots that can be configured with any assortment of the modules up to 2400 W (up to 4800 W with mainframe extension). The high-performance electronic load modules of the MDL4U Series are capable of operating in constant current (CC), constant voltage (CV), constant resistance (CR), and constant power (CW) mode, which uses DSP technology to simulate non-linear loads and realistic loading behavior.

Modules offer wide voltage and current range, 0 to 500 V, 0 to 120 A
Support for up to 4 modules/8 channels or 8 modules/16 channels with mainframe extension
Transient mode up to 25 kHz
Synchronous Load on/off function
Adjustable slew rate in CC mode
Standard LAN, GPIB, USB, and RS232 interfaces with USBTMC/SCPI protocol support
Short circuit test simulates a short at the input
Built-in 16-bit resolution voltage and current measurement (0.1 mV, 0.01 mA)
Remote voltage sensing to compensate for the effect of voltage drop in wires
Operate identical modules in parallel mode for high current applications
OVP/OCP/OPP/OTP and reverse voltage protection
Model MDL4U600 B&K Precision

Mainframe Mainframe Extension Modules
| Model | MDL4U001 | MDL4U002 | MDL4U200 | MDL4U252* | MDL4U302* | MDL4U305 | MDL4U400 | MDL4U505 | MDL4U600
| Power | up to 2400 W total | up to 2400 W total | 200 W | 250 W/50 W | 300 W/300 W | 300 W | 400 W | 500 W | 600 W
| Voltage | n/a | n/a | 80 V | 80 V | 80 V | 500 V | 80 V | 500 V | 80 V
| Current | n/a | n/a | 40 A | 20 A | 45 A | 20 A | 60 A | 30 A | 120 A
| Inputs | n/a | n/a | 1 | 2 | 2 | 1 | 1 | 1 | 1

*The MDL4U252 and MDL4U302 are dual-channel modules. MDL4U252 users can allocate 250 W to either channel up to 300 W total (e.g. 50 W/250 W, 250 W/50 W, 150 W/150 W). MDL4U302 users can allocate 300 W to either channel up to 600 W total (e.g. 300 W/300 W).

The post MDL4U600 appeared first on RN Embedded Solutions.

1692

admin — Tue, 26 Mar 2024 08:46:43 +0000

The Model 1692 B&K Precision Switching Mode DC Power Supply provides high current output in a lightweight and compact package. It is suitable for a variety of uses, especially for powering DC operated mobile radio equipment on the bench. It provides a variable voltage output from 3V to 15V at 40A continuous operation. In addition a fixed 13.8 VDC output is also selectable by a slider switch. Switching mode power supplies have the advantage of lightweight and high efficiency when compared to traditional linear mode power supplies. The efficiency can exceed 80% under the best conditions. Advanced circuitry protects against overload and provides immunity from RFI. A bright red and green LED display provides for an accurate and highly readable indicator of settings.

Lightweight and compact
High efficiency
Current fold back circuitry with illuminated indicator prevents overloading the power supply
Over temperature protection circuitry
Over voltage protection prevents abnormal high output voltage
High RFI stability
Variable output 3V to 15V at 40A

Ordering Information: Base Model 1692 B&K Precision operates with 110 V input only. For 220 V operation, request model 1692-220V at time of order.

The post 1692 appeared first on RN Embedded Solutions.

9205B

admin — Mon, 25 Mar 2024 06:08:23 +0000

Any 9200B Model 9805B B&K Precision series model can replace several supplies on your bench or in your rack. Unlike conventional supplies with fixed output ratings, these multi-range power supplies automatically recalculate voltage and current limits for each setting, providing full output power in any Volt/Amp combination within the rated voltage and current limits.

For benchtop applications, these power supplies provide a numerical keypad for direct data entry along with convenient cursors and analog style knobs to quickly make incremental voltage or current changes. System integrators benefit from the standard USB (USBTMC-compliant) and RS232 interfaces supporting SCPI commands.

Multi-ranging operation
High programming and readback resolution of 1 mV/0.1 mA
Output timer function
List mode programming
Store and recall up to 72 instrument settings
Standard USB (USBTMC-compliant) and RS232 interfaces supporting SCPI commands for remote control
Remote sense
Overvoltage protection (OVP), overpower protection (OPP), overtemperature protection (OTP), and key-lock function
NI-certified LabVIEW driver and softpanel for remote control, test sequence generation, and datalogging available
Compact 19″ half-rack form factor allows for side-by-side rack mounting of two units
Model 9805B B&K Precision

The post 9205B appeared first on RN Embedded Solutions.

9206B

admin — Mon, 25 Mar 2024 05:55:39 +0000

Any 9200B Model 9206B B&K Precision series model can replace several supplies on your bench or in your rack. Unlike conventional supplies with fixed output ratings, these multi-range power supplies automatically recalculate voltage and current limits for each setting, providing full output power in any Volt/Amp combination within the rated voltage and current limits.

Multi-ranging operation
High programming and readback resolution of 1 mV/0.1 mA
Output timer function
List mode programming
Store and recall up to 72 instrument settings
Standard USB (USBTMC-compliant) and RS232 interfaces supporting SCPI commands for remote control
Remote sense
Overvoltage protection (OVP), overpower protection (OPP), overtemperature protection (OTP), and key-lock function
NI-certified LabVIEW driver and softpanel for remote control, test sequence generation, and datalogging available
Compact 19″ half-rack form factor allows for side-by-side rack mounting of two units
Model 9206B B&K Precision

The post 9206B appeared first on RN Embedded Solutions.