8 A Archives - RN Embedded Solutions

9111

admin — Tue, 26 Mar 2024 07:26:13 +0000

Models 9110 and Model 9111 B&K Precision are a new type of power supply. Unlike conventional power supplies with fixed output ratings, they automatically recalculate voltage and current limits for each setting, providing any Volt/Amp combination within the rated power. By providing greatly expanded choices of maximum power Volt/Amp combinations, users can cut down on the number of power supplies required and free up valuable bench space.

Output rating up to 180 W within 60 V/ 8 A (model 9111) or 100 W within 60 V/ 5 A (model 9110)
Digitally controlled, multi-ranging output
10mV/1mA resolution over the full range
Bright, easy to read display
Very compact and lightweight
Low ripple and noise
OCP, OVP and OTP protection
Output On/Off control
Store and Recall 4 x 100 groups of preset Volt/Amp values
Model 9111 B&K Precision

The post 9111 appeared first on RN Embedded Solutions.

9181B

admin — Mon, 25 Mar 2024 07:54:50 +0000

The 9170B/Model 9181B B&K Precision series programmable DC power supplies deliver clean, stable and precise output power due to the supplies’ exceptionally low ripple and noise, low temperature coefficient, excellent regulation and fast transient response time characteristics.

These power supplies offer SCPI IEEE488.2 compliant USB (standard), RS232, RS485, GPIB and LAN interfaces, combined with front and rear panel output and remote sense terminals to facilitate test system development and integration. The LAN interface includes a built-in web server that allows users to configure, control, or monitor basic power supply settings.

In addition to a full numerical keypad for convenient data entry, this series also provides unique features not typically found in comparable power sources, such as LED test modes, modular interface card slots, automatic range selection, and an optional 8-bit bidirectional digital I/O interface.

Single and dual output models with up to 210W output power
Exceptionally low ripple and noise
Front and rear panel output
List mode for executing up to 10 stored test sequences with a maximum of 150 steps in total
Overvoltage/overcurrent/overtemperature protection (OVP/OCP/OTP) and key-lock function
Fast transient response time of < 50 us for most models
Fast command processing time < 10 ms
Programmable voltage and current slew rates
Standard USB interface
4 optional types of modular interface cards add LAN and GPIB, Digital I/O and Analog Control, RS485, or RS232 functionality
LabVIEW (TM) drivers available
Model 9181B B&K Precision

The post 9181B appeared first on RN Embedded Solutions.

9240

admin — Mon, 25 Mar 2024 07:45:20 +0000

The Model 9240 B&K Precision Series sets a new standard for general purpose DC power supplies by including many features and capabilities found in high performance instruments as standard. Multi-range operation provides up to 200 W of clean output power in a compact 2U form factor.

These power supplies combine an easy-to-use interface with advanced list programming features, battery charge mode, and data logging to serve a wide range of applications including production test, R&D, electronic service, and education.

Isolated and floating output with front panel remote sense
Up to 120 W or 200 W of multi-range power in compact 2U half-rack form factor
Low output ripple and noise down to 1 mVrms
Advanced and easy to use list mode programming
Battery charge function with configurable stop conditions
Direct data logging to USB flash drive
Thermostatically-controlled fans for quiet operation
Adjustable voltage and current slew rates
OVP, OCP, OTP, and key-lock protections
USB (USBTMC-compliant) and LXI compliant LAN standard, GPIB option
LabVIEWTM, IVI-C, and IVI.NET drivers provided
Operating software included
cTUVus certification mark
Model 9240 B&K Precision

The post 9240 appeared first on RN Embedded Solutions.

9240-GPIB

admin — Mon, 25 Mar 2024 07:12:49 +0000

The Model 9240-GPIB B&K Precision Series sets a new standard for general purpose DC power supplies by including many features and capabilities found in high performance instruments as standard. Multi-range operation provides up to 200 W of clean output power in a compact 2U form factor.

Isolated and floating output with front panel remote sense
Up to 120 W or 200 W of multi-range power in compact 2U half-rack form factor
Low output ripple and noise down to 1 mVrms
Advanced and easy to use list mode programming
Battery charge function with configurable stop conditions
Direct data logging to USB flash drive
Thermostatically-controlled fans for quiet operation
Adjustable voltage and current slew rates
OVP, OCP, OTP, and key-lock protections
USB (USBTMC-compliant) and LXI compliant LAN standard, GPIB option
LabVIEWTM, IVI-C, and IVI.NET drivers provided
Operating software included
cTUVus certification mark
Model 9240-GPIB B&K Precision

The post 9240-GPIB appeared first on RN Embedded Solutions.

9140

admin — Mon, 25 Mar 2024 06:00:22 +0000

The Model 9140 B&K Precision Series triple output multi-range DC power supplies combine industry-leading power density and performance with an extensive set of features in a compact 2U form factor. Three isolated output channels each produce 100 W of clean power with low ripple and noise characteristics. Combine channels for up to 300 W total output power.

Powerful list mode programming enables users to set up and execute complex test sequences directly from the front panel. Multiple outputs, USB data logging, and comprehensive protection features make these power supplies suitable for a wide range of benchtop or test system applications.

Three independent, floating output channels for up to 100 W per channel or 300 W total
High power density, compact 2U half-rack form factor
Multi-ranging operation
Low output ripple and noise down to 1 mVrms
Combine outputs to increase voltage up to 180 V or 24 A (depending on model)
Advanced and easy to use list mode programming
Channel coupling, tracking, configurable delays
Direct data logging to USB flash drive
Thermostatically-controlled fans for quiet operation
Adjustable voltage and current slew rates
OVP, OCP, OTP, and key-lock protections
USB (USBTMC-compliant) and LXI compliant LAN standard, GPIB option
LabVIEW^TM, IVI-C, and IVI.NET drivers provided
Operating software available
cTUVus certification mark
Model 9140 B&K Precision

The post 9140 appeared first on RN Embedded Solutions.

9140-GPIB

admin — Mon, 25 Mar 2024 05:18:48 +0000

The Model 9140-GPIB B&K Precision Series triple output multi-range DC power supplies combine industry-leading power density and performance with an extensive set of features in a compact 2U form factor. Three isolated output channels each produce 100 W of clean power with low ripple and noise characteristics. Combine channels for up to 300 W total output power.

Three independent, floating output channels for up to 100 W per channel or 300 W total
High power density, compact 2U half-rack form factor
Multi-ranging operation
Low output ripple and noise down to 1 mVrms
Combine outputs to increase voltage up to 180 V or 24 A (depending on model)
Advanced and easy to use list mode programming
Channel coupling, tracking, configurable delays
Direct data logging to USB flash drive
Thermostatically-controlled fans for quiet operation
Adjustable voltage and current slew rates
OVP, OCP, OTP, and key-lock protections
USB (USBTMC-compliant) and LXI compliant LAN standard, GPIB option
LabVIEW^TM, IVI-C, and IVI.NET drivers provided
Operating software available
cTUVus certification mark
Model 9140-GPIB B&K Precision

The post 9140-GPIB appeared first on RN Embedded Solutions.