60 A Archives - RN Embedded Solutions https://rnembedded.com/max-current-2/60-a/ Wed, 24 Jul 2024 05:51:24 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.1 https://rnembedded.com/wp-content/uploads/2024/06/cropped-cropped-Embedded-Solutions-2-removebg-preview-32x32.png 60 A Archives - RN Embedded Solutions https://rnembedded.com/max-current-2/60-a/ 32 32 MDL4U400 https://rnembedded.com/product/bk-precision-mdl4u400-2/ Thu, 28 Mar 2024 11:11:44 +0000 https://rnembedded.com/?post_type=product&p=3205 Model MDL4U400
MDL4U Series
Programmable DC Electronic Load Module 400 W / 80 V / 60 A
3 yr Warranty

The post MDL4U400 appeared first on RN Embedded Solutions.

]]> The MDL4U Model MDL4U400 B&K Precision Series is a multi-channel modular programmable electronic load system. Seven different modules of programmable DC loads ranging in power from 200 W to 600 W provide users the flexibility to test a wide range of power sources from multi-output DC power supplies to batteries, fuel cells, and photovoltaic arrays.
The mainframe has four slots that can be configured with any assortment of the modules up to 2400 W (up to 4800 W with mainframe extension). The high-performance electronic load modules of the MDL4U Series are capable of operating in constant current (CC), constant voltage (CV), constant resistance (CR), and constant power (CW) mode, which uses DSP technology to simulate non-linear loads and realistic loading behavior.
  • Modules offer wide voltage and current range, 0 to 500 V, 0 to 120 A
  • Support for up to 4 modules/8 channels or 8 modules/16 channels with mainframe extension
  • Transient mode up to 25 kHz
  • Synchronous Load on/off function
  • Adjustable slew rate in CC mode
  • Standard LAN, GPIB, USB, and RS232 interfaces with USBTMC/SCPI protocol support
  • Short circuit test simulates a short at the input
  • Built-in 16-bit resolution voltage and current measurement (0.1 mV, 0.01 mA)
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Operate identical modules in parallel mode for high current applications
  • OVP/OCP/OPP/OTP and reverse voltage protection
  • Model MDL4U400 B&K Precision
 Mainframe Mainframe Extension Modules
| Model  | MDL4U001  | MDL4U002  | MDL4U200  | MDL4U252*  | MDL4U302*  | MDL4U305  | MDL4U400  | MDL4U505  | MDL4U600
| Power  | up to 2400 W total  | up to 2400 W total  | 200 W  | 250 W/50 W  | 300 W/300 W  | 300 W  | 400 W  | 500 W  | 600 W
| Voltage  | n/a  | n/a  | 80 V  | 80 V  | 80 V  | 500 V  | 80 V  | 500 V  | 80 V
| Current  | n/a  | n/a  | 40 A  | 20 A  | 45 A  | 20 A  | 60 A  | 30 A  | 120 A
| Inputs  | n/a  | n/a  | 1  | 2  | 2  | 1  | 1  | 1  | 1

*The MDL4U252 and MDL4U302 are dual-channel modules. MDL4U252 users can allocate 250 W to either channel up to 300 W total (e.g. 50 W/250 W, 250 W/50 W, 150 W/150 W). MDL4U302 users can allocate 300 W to either channel up to 600 W total (e.g. 300 W/300 W).

MDL Series (non-4U) modules are not compatible with newer MDL4U Series mainframe model MDL4U001 or mainframe extension model MDL4U002.

The post MDL4U400 appeared first on RN Embedded Solutions.

]]> 8551 https://rnembedded.com/product/bk-precision8551/ Thu, 28 Mar 2024 10:19:20 +0000 https://rnembedded.com/?post_type=product&p=3183 Model 8551
8550 Series
350 W Programmable DC Electronic Load
3 yr Warranty

[forminator_form id="4088"]

The post 8551 appeared first on RN Embedded Solutions.

]]> The 8550 Model 8551 B&K Precision Series DC electronic loads provide many features and capabilities typically found in performance instruments, at a value price. Capable of sinking 350 W in a compact benchtop form factor, this series is well equipped for testing and evaluating power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays.
Configurable list, transient, and automatic test modes offer dynamically changing load conditions for evaluating a variety of DC sources. The dedicated battery discharge mode simplifies battery testing.
  • High power density, up to 350 W in compact 2U half-rack form factor
  • Transient mode up to 20 kHz in CC mode
  • CC/CV/CR/CW operating modes
  • Front panel remote sense
  • List mode programming
  • Automatic test mode
  • Overvoltage (OVP), overcurrent (OCP), Overpower (OPP) protection, remote reverse voltage (RRV), and key-lock function
  • Thermostatically-controlled fans for quiet operation
  • Short-circuit test
  • Configurable battery discharge test
  • CR-LED mode to simulate the loading behavior of typical LEDs
  • Adjustable voltage/current slew rate
  • Front panel USB host port for logging measurement data
  • Operating software and battery test software provided
  • RS232 and Handler interfaces
  • Model 8551 B&K Precision

The post 8551 appeared first on RN Embedded Solutions.

]]> 8601B https://rnembedded.com/product/bk-precision-8601b/ Thu, 28 Mar 2024 09:35:41 +0000 https://rnembedded.com/?post_type=product&p=3161 Model 8601B
8600 Series
250 W Programmable DC Electronic Load without GPIB
3 yr Warranty

[forminator_form id="4096"]

The post 8601B appeared first on RN Embedded Solutions.

]]> The 8600/B Model 8601b B&K Precision Series programmable DC electronic loads provide the performance of modular system DC electronic loads in a compact benchtop form factor. With fast transient operation speeds up to 25 kHz, and high 16-bit measurement resolution and accuracy, these DC loads can be used for testing and evaluating a variety of DC sources such as DC power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays.

The DC electronic loads can operate in constant current (CC), constant voltage (CV), constant resistance (CR), and constant power (CW) mode. This series provides flexible triggering capabilities, analog current control and monitoring, and standard USB (USBTMC-compliant) or RS232 serial interfaces for remote communication. GPIB is available as an option on select models.

  • Wide voltage and current range, 0 to 500 V, 0 to 240 A
  • CC/CV/CR/CW operating modes
  • Transient mode up to 25 kHz
  • 16-bit resolution voltage and current measurement
  • List mode function
  • Adjustable slew rate in CC mode
  • Short circuit test
  • Built-in battery test function with voltage level, capacity level, and timer stop conditions
  • CR-LED mode to simulate the loading behavior of typical LEDs
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Analog current control and monitoring
  • Standard USB (USBTMC-compliant) and RS232 interfaces with SCPI protocol support
  • GPIB optional on select models
  • OVP/OCP/OPP/OTP and local/remote reverse voltage (LRV/RRV) protection
  • Model 8601b B&K Precision

The post 8601B appeared first on RN Embedded Solutions.

]]> MDL400 https://rnembedded.com/product/bk-precision-mdl400/ Thu, 28 Mar 2024 09:22:27 +0000 https://rnembedded.com/?post_type=product&p=3157 Model MDL400
MDL Series
400 W Programmable DC Electronic Load Module
3 yr Warranty

[forminator_form id="4131"]

The post MDL400 appeared first on RN Embedded Solutions.

]]> The MDL Model MDL400 B&K Precision Series is a multi-channel modular programmable electronic load system. Seven different modules of programmable DC loads ranging in power from 200 W to 600 W provide users the flexibility to test a wide range of power sources from multi-output AC/DC power supplies to batteries, fuel cells, and photovoltaic arrays.

The mainframe has four slots that can be configured with any assortment of the modules up to 2400 W (up to 4800 W with mainframe extension). The high-performance electronic load modules of the MDL Series are capable of operating in constant current (CC), constant voltage (CV), constant resistance (CR), constant power (CW), and constant impedance (CZ) mode, which uses DSP technology to simulate non-linear loads and realistic loading behavior.

  • Modules offer wide voltage and current range, 0 to 500 V, 0 to 120 A
  • Support for up to 4 modules/8 channels or 8 modules/16 channels with mainframe extension
  • Transient mode up to 25 kHz
  • Synchronous Load on/off function
  • Adjustable slew rate in CC mode
  • Standard LAN, GPIB, USB, and RS-232 interfaces with USBTMC/SCPI protocol support
  • Short circuit test
  • Built-in 16-bit resolution voltage and current measurement (0.1 mV, 0.01 mA)
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Operate identical modules in parallel mode for high current applications
  • OVP/OCP/OPP/OTP and reverse voltage protection
  • Model MDL400 B&K Precision
Mainframe  Mainframe Extension Modules
Model MDL001 MDL002 MDL200 MDL252* MDL302* MDL305 MDL400 MDL505 MDL600
Power up to 2400 W total up to 2400 W total 200 W 250 W/50 W 300 W/300 W 300 W 400 W 500 W 600 W
Voltage n/a n/a 80 V 80 V 80 V 500 V 80 V 500 V 80 V
Current n/a n/a 40 A 20 A 45 A 20 A 60 A 30 A 120 A
Inputs n/a n/a 1 2 2 1 1 1 1
*The MDL252 and MDL302 are dual-channel modules. MDL252 users can allocate 250 W to either channel up to 300 W total (e.g. 50 W/250 W, 250 W/50 W, 150 W/150 W). MDL302 users can allocate 300 W to either channel up to 600 W total (e.g. 300 W/300 W).

The post MDL400 appeared first on RN Embedded Solutions.

]]> 8601 https://rnembedded.com/product/bk-precision-8601/ Thu, 28 Mar 2024 09:16:15 +0000 https://rnembedded.com/?post_type=product&p=3155 Model 8601
8600 Series
250 W Programmable DC Electronic Load
3 yr Warranty

[forminator_form id="4094"]

The post 8601 appeared first on RN Embedded Solutions.

]]> The 8600/B Series programmable DC electronic loads provide the performance of modular system DC electronic loads in a compact benchtop form factor. With fast transient operation speeds up to 25 kHz, and high 16-bit measurement resolution and accuracy, these DC loads can be used for testing and evaluating a variety of DC sources such as DC power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays.

The DC electronic loads can operate in constant current (CC), constant voltage (CV), constant resistance (CR), and constant power (CW) mode. This series provides flexible triggering capabilities, analog current control and monitoring, and standard USB (USBTMC-compliant) or RS232 serial interfaces for remote communication. GPIB is available as an option on select models.

  • Wide voltage and current range, 0 to 500 V, 0 to 240 A
  • CC/CV/CR/CW operating modes
  • Transient mode up to 25 kHz
  • 16-bit resolution voltage and current measurement
  • List mode function
  • Adjustable slew rate in CC mode
  • Short circuit test
  • Built-in battery test function with voltage level, capacity level, and timer stop conditions
  • CR-LED mode to simulate the loading behavior of typical LEDs
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Analog current control and monitoring
  • Standard USB (USBTMC-compliant) and RS232 interfaces with SCPI protocol support
  • GPIB optional on select models
  • OVP/OCP/OPP/OTP and local/remote reverse voltage (LRV/RRV) protection

The post 8601 appeared first on RN Embedded Solutions.

]]> MDL4U400 https://rnembedded.com/product/bk-precision-mdl4u400/ Thu, 28 Mar 2024 08:53:55 +0000 https://rnembedded.com/?post_type=product&p=3145 Model MDL4U400
MDL4U Series
Programmable DC Electronic Load Module 400 W / 80 V / 60 A
3 yr Warranty

[forminator_form id="4141"]

 

The post MDL4U400 appeared first on RN Embedded Solutions.

]]> The MDL4U Model MDL4U400 B&K Precision Series is a multi-channel modular programmable electronic load system. Seven different modules of programmable DC loads ranging in power from 200 W to 600 W provide users the flexibility to test a wide range of power sources from multi-output DC power supplies to batteries, fuel cells, and photovoltaic arrays.
The mainframe has four slots that can be configured with any assortment of the modules up to 2400 W (up to 4800 W with mainframe extension). The high-performance electronic load modules of the MDL4U Series are capable of operating in constant current (CC), constant voltage (CV), constant resistance (CR), and constant power (CW) mode, which uses DSP technology to simulate non-linear loads and realistic loading behavior.
  • Modules offer wide voltage and current range, 0 to 500 V, 0 to 120 A
  • Support for up to 4 modules/8 channels or 8 modules/16 channels with mainframe extension
  • Transient mode up to 25 kHz
  • Synchronous Load on/off function
  • Adjustable slew rate in CC mode
  • Standard LAN, GPIB, USB, and RS232 interfaces with USBTMC/SCPI protocol support
  • Short circuit test simulates a short at the input
  • Built-in 16-bit resolution voltage and current measurement (0.1 mV, 0.01 mA)
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Operate identical modules in parallel mode for high current applications
  • OVP/OCP/OPP/OTP and reverse voltage protection
  • Model MDL4U400 B&K Precision
 Mainframe Mainframe Extension Modules
| Model  | MDL4U001  | MDL4U002  | MDL4U200  | MDL4U252*  | MDL4U302*  | MDL4U305  | MDL4U400  | MDL4U505  | MDL4U600
| Power  | up to 2400 W total  | up to 2400 W total  | 200 W  | 250 W/50 W  | 300 W/300 W  | 300 W  | 400 W  | 500 W  | 600 W
| Voltage  | n/a  | n/a  | 80 V  | 80 V  | 80 V  | 500 V  | 80 V  | 500 V  | 80 V
| Current  | n/a  | n/a  | 40 A  | 20 A  | 45 A  | 20 A  | 60 A  | 30 A  | 120 A
| Inputs  | n/a  | n/a  | 1  | 2  | 2  | 1  | 1  | 1  | 1

*The MDL4U252 and MDL4U302 are dual-channel modules. MDL4U252 users can allocate 250 W to either channel up to 300 W total (e.g. 50 W/250 W, 250 W/50 W, 150 W/150 W). MDL4U302 users can allocate 300 W to either channel up to 600 W total (e.g. 300 W/300 W).

MDL Series (non-4U) modules are not compatible with newer MDL4U Series mainframe model MDL4U001 or mainframe extension model MDL4U002.

The post MDL4U400 appeared first on RN Embedded Solutions.

]]> 8616 https://rnembedded.com/product/bk-precision-8616/ Wed, 27 Mar 2024 10:20:09 +0000 https://rnembedded.com/?post_type=product&p=3092 Model 8616
8600 Series
1200 W Programmable DC Electronic Load
3 yr Warranty

[forminator_form id="4110"]

The post 8616 appeared first on RN Embedded Solutions.

]]> The 8600/B Model 8616 B&K Precision Series programmable DC electronic loads provide the performance of modular system DC electronic loads in a compact benchtop form factor. With fast transient operation speeds up to 25 kHz, and high 16-bit measurement resolution and accuracy, these DC loads can be used for testing and evaluating a variety of DC sources such as DC power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays.

The DC electronic loads can operate in constant current (CC), constant voltage (CV), constant resistance (CR), and constant power (CW) mode. This series provides flexible triggering capabilities, analog current control and monitoring, and standard USB (USBTMC-compliant) or RS232 serial interfaces for remote communication. GPIB is available as an option on select models.

  • Wide voltage and current range, 0 to 500 V, 0 to 240 A
  • CC/CV/CR/CW operating modes
  • Transient mode up to 25 kHz
  • 16-bit resolution voltage and current measurement
  • List mode function
  • Adjustable slew rate in CC mode
  • Short circuit test
  • Built-in battery test function with voltage level, capacity level, and timer stop conditions
  • CR-LED mode to simulate the loading behavior of typical LEDs
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Analog current control and monitoring
  • Standard USB (USBTMC-compliant) and RS232 interfaces with SCPI protocol support
  • GPIB optional on select models
  • OVP/OCP/OPP/OTP and local/remote reverse voltage (LRV/RRV) protection
  • Model 8616 B&K Precision

The post 8616 appeared first on RN Embedded Solutions.

]]> 1693 https://rnembedded.com/product/bk-precision-1693/ Tue, 26 Mar 2024 06:22:31 +0000 https://rnembedded.com/?post_type=product&p=2871 Model 1693
1693 and 1694
1-15V, 60A Switching DC Power Supply with Remote Sense
1 yr Warranty

[forminator_form id="3944"]

The post 1693 appeared first on RN Embedded Solutions.

]]> The Model 1693 B&K Precision and 1694 switching mode DC power supplies provide high current output in a lightweight and compact package. They include a remote sensing terminal to compensate for voltage drop across load leads. The output voltage level can also be externally controlled via an analog remote control terminal. Bright red and green LED displays provide for an accurate and highly readable indicator of settings.

  • Lightweight and compact
  • Current fold back circuitry with illuminated indicator prevents overloading the power supply
  • Overtemperature protection circuitry
  • Overvoltage protection
  • Remote sense

The post 1693 appeared first on RN Embedded Solutions.

]]> 1900B https://rnembedded.com/product/1900b/ Mon, 25 Mar 2024 12:14:10 +0000 https://rnembedded.com/?post_type=product&p=2834 Model 1900B
1900B Series
1-16 V, 60 A Switching DC Power Supply
2 yr Warranty

[forminator_form id="3963"]

The post 1900B appeared first on RN Embedded Solutions.

]]> Model 1901B – Power Supplies, 1901B, and 1902B are laboratory grade switching mode DC power supply with high current output in a small form factor and lightweight package. The supplies provide various configurations of high output voltage or high output current and make setting voltage and current levels fast and precise through its dual action, coarse/fine rotary encoder control. In addition to constant voltage (CV) and constant current (CC) modes, the high efficiency DC power supplies offer a unique solution with its preset and remote control modes. Save up to three different presets of voltage and current values for quick recall. The remote control function allows the output power, voltage, and current to be adjusted without touching the front panel of the power supply. A remote sensing terminal is also available (model 1900B only) for use to compensate for long output line losses. These features make the 1900B Series suitable for a wide range of applications including production testing, telecommunications, R&D, service, and university labs.

  • Automatic CV/CC crossover operation
  • Lightweight and compact
  • Rotary encoder control for precise voltage and current setting
  • 3 user-defined voltage and current presets
  • USB interface with PC software for remote control and external timed programming
  • Analog remote control function
  • Overvoltage, overtemperature, and overload protection
  • Remote sense (model 1900B only)
  • Model 1901B – Power Supplies

Ordering Information: Base models 1900B, 1901B, and 1902B operate with 110 V input only. For 220 V operation, request model 1900B-220V, 1901B-220V, or 1902B-220V at time of order.

 

The post 1900B appeared first on RN Embedded Solutions.

]]> 9115B https://rnembedded.com/product/bk-precision-9115b/ Mon, 25 Mar 2024 05:12:23 +0000 https://rnembedded.com/?post_type=product&p=2720 Model 9115B
9115 Series
1200W Multi-Range 80V/60A DC Power Supply without GPIB
1 yr Warranty

[forminator_form id="3987"]

The post 9115B appeared first on RN Embedded Solutions.

]]> Any Model 9115B B&K Precision Series model can replace several supplies on your bench or in your rack. Unlike conventional supplies with fixed output ratings, these multi-range power supplies automatically recalculate voltage and current limits for each setting, providing full output power in any Volt/Amp combination within the rated voltage and current limits.

For benchtop applications, this series provides a numerical keypad for direct data entry along with convenient cursors and analog-style knobs to quickly make incremental voltage or current changes. Systems integrators benefit from the standard USB (USBTMC-compliant), RS232, RS485, and LAN (9117 only) interfaces supporting SCPI commands. GPIB is available as an option for select models.

The 9115/B-AT provides automotive power test waveforms compliant to DIN 40839 and ISO 16750-2:2012(E) standards that can simulate common test conditions for electrical and electronic devices installed in automobiles.

  • Multi-ranging operation (output up to max power rating within maximum voltage and current rating)
  • Compact, high density, 1U rackmount form factor (2U for 9117)
  • High programming and readback resolution
  • Adjustable voltage rise and fall times
  • Sequence programming (internal list mode for 9115/B, 9115/B-AT, and 9116/B)
  • Store and recall up to 100 instrument settings
  • Standard USB (USBTMC-compliant), RS232, RS485, and LAN (9117 only) interfaces supporting SCPI commands for remote control
  • GPIB optional for select models
  • Analog interface with control and monitoring functions
  • Remote sense
  • Overvoltage protection (OVP), overpower protection (OPP), overtemperature protection (OTP), and key-lock function
  • Softpanel for remote control, test sequence generation, and data logging
  • Model 9115B B&K Precision

 

The post 9115B appeared first on RN Embedded Solutions.

]]>