15 A Archives - RN Embedded Solutions https://rnembedded.com/max-current-2/15-a/ Tue, 23 Jul 2024 11:44:18 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.1 https://rnembedded.com/wp-content/uploads/2024/06/cropped-cropped-Embedded-Solutions-2-removebg-preview-32x32.png 15 A Archives - RN Embedded Solutions https://rnembedded.com/max-current-2/15-a/ 32 32 8602 https://rnembedded.com/product/8602-2/ Thu, 28 Mar 2024 11:19:10 +0000 https://rnembedded.com/?post_type=product&p=3207 Model 8602
8600 Series
200 W Programmable DC Electronic Load
yr Warranty

[forminator_form id="3975"]

The post 8602 appeared first on RN Embedded Solutions.

]]>

The 8600/B Model 8602 BK Precision Series programmable DC electronic loads provide the performance of modular system DC electronic loads in a compact benchtop form factor. With fast transient operation speeds up to 25 kHz, and high 16-bit measurement resolution and accuracy, these DC loads can be used for testing and evaluating a variety of DC sources such as DC power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays.

The DC electronic loads can operate in constant current (CC), constant voltage (CV), constant resistance (CR), and constant power (CW) mode. This series provides flexible triggering capabilities, analog current control and monitoring, and standard USB (USBTMC-compliant) or RS232 serial interfaces for remote communication. GPIB is available as an option on select models.

  • Wide voltage and current range, 0 to 500 V, 0 to 240 A
  • CC/CV/CR/CW operating modes
  • Transient mode up to 25 kHz
  • 16-bit resolution voltage and current measurement
  • List mode function
  • Adjustable slew rate in CC mode
  • Short circuit test
  • Built-in battery test function with voltage level, capacity level, and timer stop conditions
  • CR-LED mode to simulate the loading behavior of typical LEDs
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Analog current control and monitoring
  • Standard USB (USBTMC-compliant) and RS232 interfaces with SCPI protocol support
  • GPIB optional on select models
  • OVP/OCP/OPP/OTP and local/remote reverse voltage (LRV/RRV) protection
  • Model 8602 BK Precision

The post 8602 appeared first on RN Embedded Solutions.

]]> 8502B https://rnembedded.com/product/bk-precision-8502b/ Thu, 28 Mar 2024 09:51:57 +0000 https://rnembedded.com/?post_type=product&p=3163 Model 8502B
8500B Series
300 W Programmable DC Electronic Load
3 yr Warranty

[forminator_form id="4079"]

The post 8502B appeared first on RN Embedded Solutions.

]]> The 8500B Model 8502B – DC Electronic Loads Series programmable DC electronic loads improve upon all aspects of its predecessor while maintaining dependability at a value price. This series supports both SCPI and the backwards compatible legacy protocol.

With a transient mode speed of up to 10 kHz and multi-type input terminals for banana plug or spade connectors, these DC loads are suitable for testing and evaluating DC power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays.

  • Maximum input power up to 1500 W
  • CC/CV/CR/CW operating modes
  • Transient mode up to 10 kHz in CC mode
  • 16-bit voltage and current measurement system with up to 0.1 mV / 0.1 mA resolution
  • List mode and adjustable slew rate in CC mode
  • Short circuit test
  • Built-in battery test function with voltage level, capacity level, and timer stop conditions
  • CR-LED mode to simulate the loading behavior of typical LEDs
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Analog current control and monitoring
  • TTL (DB9) interface, includes TTL to USB adapter (models 8542B, 8500B, 8502B, 8510B)
  • USB and RS232 interfaces (8514B only)
  • OVP/OCP/OPP/OTP and local/remote reverse voltage (LRV/RRV) protection
  • Model 8502B – DC Electronic Loads

The post 8502B appeared first on RN Embedded Solutions.

]]> 8602B https://rnembedded.com/product/bk-precision-8602b/ Thu, 28 Mar 2024 09:27:49 +0000 https://rnembedded.com/?post_type=product&p=3159 Model 8602B
8600 Series
200 W Programmable DC Electronic Load without GPIB
3 yr Warranty

[forminator_form id="4097"]

The post 8602B appeared first on RN Embedded Solutions.

]]> The 8600/B Model 8602B B&K Precision Series programmable DC electronic loads provide the performance of modular system DC electronic loads in a compact benchtop form factor. With fast transient operation speeds up to 25 kHz, and high 16-bit measurement resolution and accuracy, these DC loads can be used for testing and evaluating a variety of DC sources such as DC power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays.

The DC electronic loads can operate in constant current (CC), constant voltage (CV), constant resistance (CR), and constant power (CW) mode. This series provides flexible triggering capabilities, analog current control and monitoring, and standard USB (USBTMC-compliant) or RS232 serial interfaces for remote communication. GPIB is available as an option on select models.

  • Wide voltage and current range, 0 to 500 V, 0 to 240 A
  • CC/CV/CR/CW operating modes
  • Transient mode up to 25 kHz
  • 16-bit resolution voltage and current measurement
  • List mode function
  • Adjustable slew rate in CC mode
  • Short circuit test
  • Built-in battery test function with voltage level, capacity level, and timer stop conditions
  • CR-LED mode to simulate the loading behavior of typical LEDs
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Analog current control and monitoring
  • Standard USB (USBTMC-compliant) and RS232 interfaces with SCPI protocol support
  • GPIB optional on select models
  • OVP/OCP/OPP/OTP and local/remote reverse voltage (LRV/RRV) protection
  • Model 8602B B&K Precision

The post 8602B appeared first on RN Embedded Solutions.

]]> 8602 https://rnembedded.com/product/bk-precision-8602/ Thu, 28 Mar 2024 09:03:50 +0000 https://rnembedded.com/?post_type=product&p=3146 Model 8602
8600 Series
200 W Programmable DC Electronic Load
3 yr Warranty

[forminator_form id="3975"]

The post 8602 appeared first on RN Embedded Solutions.

]]>

The 8600/B Model 8602 B&K Precision Series programmable DC electronic loads provide the performance of modular system DC electronic loads in a compact benchtop form factor. With fast transient operation speeds up to 25 kHz, and high 16-bit measurement resolution and accuracy, these DC loads can be used for testing and evaluating a variety of DC sources such as DC power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays.

The DC electronic loads can operate in constant current (CC), constant voltage (CV), constant resistance (CR), and constant power (CW) mode. This series provides flexible triggering capabilities, analog current control and monitoring, and standard USB (USBTMC-compliant) or RS232 serial interfaces for remote communication. GPIB is available as an option on select models.

  • Wide voltage and current range, 0 to 500 V, 0 to 240 A
  • CC/CV/CR/CW operating modes
  • Transient mode up to 25 kHz
  • 16-bit resolution voltage and current measurement
  • List mode function
  • Adjustable slew rate in CC mode
  • Short circuit test
  • Built-in battery test function with voltage level, capacity level, and timer stop conditions
  • CR-LED mode to simulate the loading behavior of typical LEDs
  • Remote voltage sensing to compensate for the effect of voltage drop in wires
  • Analog current control and monitoring
  • Standard USB (USBTMC-compliant) and RS232 interfaces with SCPI protocol support
  • GPIB optional on select models
  • OVP/OCP/OPP/OTP and local/remote reverse voltage (LRV/RRV) protection
  • Model 8602 B&K Precision

The post 8602 appeared first on RN Embedded Solutions.

]]> 1902B https://rnembedded.com/product/bk-precision-1902b/ Mon, 25 Mar 2024 12:20:20 +0000 https://rnembedded.com/?post_type=product&p=2843 Model 1902B
1900B Series
1-60 V, 15 A Switching DC Power Supply
2 yr Warranty

[forminator_form id="3967"]

The post 1902B appeared first on RN Embedded Solutions.

]]> Models 1900B, 1901B, and Model 1902B B&K Precision are laboratory grade switching mode DC power supply with high current output in a small form factor and lightweight package. The supplies provide various configurations of high output voltage or high output current and make setting voltage and current levels fast and precise through its dual action, coarse/fine rotary encoder control. In addition to constant voltage (CV) and constant current (CC) modes, the high efficiency DC power supplies offer a unique solution with its preset and remote control modes. Save up to three different presets of voltage and current values for quick recall. The remote control function allows the output power, voltage, and current to be adjusted without touching the front panel of the power supply. A remote sensing terminal is also available (model 1900B only) for use to compensate for long output line losses. These features make the 1900B Series suitable for a wide range of applications including production testing, telecommunications, R&D, service, and university labs.

  • Automatic CV/CC crossover operation
  • Lightweight and compact
  • Rotary encoder control for precise voltage and current setting
  • 3 user-defined voltage and current presets
  • USB interface with PC software for remote control and external timed programming
  • Analog remote control function
  • Overvoltage, overtemperature, and overload protection
  • Remote sense (model 1900B only)

Ordering Information: Base models 1900B, 1901B, and Model 1902B B&K Precision operate with 110 V input only. For 220 V operation, request model 1900B-220V, 1901B-220V, or 1902B-220V at time of order.

The post 1902B appeared first on RN Embedded Solutions.

]]> 9202B https://rnembedded.com/product/bk-precision-9202b/ Mon, 25 Mar 2024 07:58:33 +0000 https://rnembedded.com/?post_type=product&p=2790 Model 9202B
9200B Series
360W Multi-Range 60V/15A DC Power Supply
3 yr Warranty

[forminator_form id="4019"]

The post 9202B appeared first on RN Embedded Solutions.

]]> Any Model 9202B B&K Precision series model can replace several supplies on your bench or in your rack. Unlike conventional supplies with fixed output ratings, these multi-range power supplies automatically recalculate voltage and current limits for each setting, providing full output power in any Volt/Amp combination within the rated voltage and current limits.

For benchtop applications, these power supplies provide a numerical keypad for direct data entry along with convenient cursors and analog style knobs to quickly make incremental voltage or current changes. System integrators benefit from the standard USB (USBTMC-compliant) and RS232 interfaces supporting SCPI commands.

  • Multi-ranging operation
  • High programming and readback resolution of 1 mV/0.1 mA
  • Output timer function
  • List mode programming
  • Store and recall up to 72 instrument settings
  • Standard USB (USBTMC-compliant) and RS232 interfaces supporting SCPI commands for remote control
  • Remote sense
  • Overvoltage protection (OVP), overpower protection (OPP), overtemperature protection (OTP), and key-lock function
  • NI-certified LabVIEW driver and softpanel for remote control, test sequence generation, and datalogging available
  • Compact 19″ half-rack form factor allows for side-by-side rack mounting of two units
  • Model 9202B B&K Precision

The post 9202B appeared first on RN Embedded Solutions.

]]>