10 A Archives - RN Embedded Solutions

1665

admin — Tue, 26 Mar 2024 09:56:25 +0000

The 1665, 1666, and 1667 switching DC power supplies use new switching technologies to offer more power at a lower cost than traditional linear power supplies.

Constant voltage (CV) operation
Constant current (CC) operation (current limiting)
Bright easy-to-read LED displays
Overvoltage protection

The post 1665 appeared first on RN Embedded Solutions.

1687B

admin — Tue, 26 Mar 2024 09:28:01 +0000

The Model 1687B B&K Precision, 1685B, and 1688B switching mode DC power supplies provide various configurations of high output voltage or high output current in a small, lightweight form factor. In addition to their constant voltage (CV) and constant current (CC) modes, these high efficiency DC power supplies offer unique preset and remote control modes. Up to three different presets of voltage and current values can be saved for quick recall through a rear switch. For remote control, an analog remote control terminal is accessible on the rear, or use the USB interface to communicate with the power supply via PC software or remote commands. These features make the Model 1687B B&K Precision, 1685B, and 1688B suitable for a wide range of applications including production testing, telecommunications, R&D, electronic field service, and university labs.

Automatic CV/CC crossover operation
Lightweight and compact
Rotary encoder control for precise voltage and current setting
3 user-defined voltage and current presets
USB interface with PC software for remote control and external timed programming
Analog remote control function
Overvoltage, overtemperature, and overload protection

The post 1687B appeared first on RN Embedded Solutions.

1696B

admin — Tue, 26 Mar 2024 07:40:06 +0000

The Model 1696B B&K Precision, 1697B, and 1698B programmable DC power supplies deliver exceptional cost/watt value with several programming and protection features. This series improves upon previous models with increased display accuracy, simplified programming, and a USB interface with added support for basic SCPI commands. PC software is provided for timed list mode programming and data logging.

Well suited for R&D, service, production testing, and education environments all models are equipped with overvoltage protection (OVP), overcurrent protection (OCP), and overtemperature protection (OTP).

Automatic CV/CC crossover operation
Store up to 10 voltage and current combinations for quick output
Lightweight and compact
Built-in voltage, current, and power meter
List mode (timed programming): program up to 20 steps
USB and RS485 interfaces
Control up to 31 power supplies from one PC through RS485, any combination of models
Protection features: Over voltage (OVP), Over current (OCP), Over Temperature (OTP), and key-lock function
Thermostatically-controlled fan (linear-speed control to minimize fan noise)
PC software included for remote control, test sequence generation, and data logging
Model 1696B B&K Precision

The post 1696B appeared first on RN Embedded Solutions.

9104

admin — Tue, 26 Mar 2024 06:54:48 +0000

Multi-range power supply models 9103 and Model 9104 B&K Precision can replace several power supplies on your bench by offering extended operating areas. Unlike conventional supplies with fixed output ratings, these power supplies automatically recalculate voltage and current limits for each setting, providing 320 W output power in any voltage/ current setting within the supply’s rated voltage and current limits.

Automatic CV/CC crossover operation
Remote Sense
Save up to 3 user-defined voltage and current presets for quick recall
Transient mode for generating square, triangular or trapezium waveforms
PC software for remote control and external timed programming
Analog remote control function and USB interface
Output on-off switch and control panel lock button for safer operation
Overvoltage and overcurrent protection
Model 9104 B&K Precision

The post 9104 appeared first on RN Embedded Solutions.

1745A

admin — Mon, 25 Mar 2024 10:07:05 +0000

B&K Precision model 1745A is a 0 to 35V, 0 to 10A DC Power Supply. This power supply has all of the great features and performance you would expect from a B&K Precision power supply. One of these features is the four digit LED disply that allows you to see 10mV and 10mA resolution. Another great feature is the output shorting button that allows the user to short the output terminals to set the current limit.

The post 1745A appeared first on RN Embedded Solutions.

9201B

admin — Mon, 25 Mar 2024 10:03:56 +0000

Any 9200B series model can replace several supplies on your bench or in your rack. Unlike conventional supplies with fixed output ratings, these multi-range power supplies automatically recalculate voltage and current limits for each setting, providing full output power in any Volt/Amp combination within the rated voltage and current limits.

For benchtop applications, these power supplies provide a numerical keypad for direct data entry along with convenient cursors and analog style knobs to quickly make incremental voltage or current changes. System integrators benefit from the standard USB (USBTMC-compliant) and RS232 interfaces supporting SCPI commands. Model 9201B B&K Precision

Multi-ranging operation
High programming and readback resolution of 1 mV/0.1 mA
Output timer function
List mode programming
Store and recall up to 72 instrument settings
Standard USB (USBTMC-compliant) and RS232 interfaces supporting SCPI commands for remote control
Remote sense
Overvoltage protection (OVP), overpower protection (OPP), overtemperature protection (OTP), and key-lock function
NI-certified LabVIEW driver and softpanel for remote control, test sequence generation, and datalogging available
Compact 19″ half-rack form factor allows for side-by-side rack mounting of two units
Model 9201B B&K Precision

The post 9201B appeared first on RN Embedded Solutions.

1747

admin — Mon, 25 Mar 2024 09:47:22 +0000

The B&K Precision model 1747 is a general purpose dual range DC power source. This power supply has two ranges and can output higher voltage at a lower current range or higher current at a lower voltage range. The 1747 provides a 0-35 V, 0-10 A range and a 0-60 V, 0-5 A range. Voltage and current are both adjustable with coarse and fine control knobs. Two large LED meters continuously monitor the output voltage and current. The power supply can be operated locally from the front panel or remotely through the RS-232 interface.

Low ripple and noise
Excellent regulation
Constant voltage (CV) and constant current (CC) operation
Two large, easy-to-read LED displays provide good visibility in bright or low light
LED indication for CV and CC modes
Automatic recall of last settings on power up
RS-232 interface
Isolated output
Overload protection
Reverse polarity protection
Model 1747 B&K Precision

The post 1747 appeared first on RN Embedded Solutions.

9171B

admin — Mon, 25 Mar 2024 08:12:14 +0000

The 9170B/9180B series programmable DC power supplies deliver clean, stable and precise output power due to the supplies’ exceptionally low ripple and noise, low temperature coefficient, excellent regulation and fast transient response time characteristics.

These power supplies offer SCPI IEEE488.2 compliant USB (standard), RS232, RS485, GPIB and LAN interfaces, combined with front and rear panel output and remote sense terminals to facilitate test system development and integration. The LAN interface includes a built-in web server that allows users to configure, control, or monitor basic power supply settings. Model 9171B B&K Precision

In addition to a full numerical keypad for convenient data entry, this series also provides unique features not typically found in comparable power sources, such as LED test modes, modular interface card slots, automatic range selection, and an optional 8-bit bidirectional digital I/O interface.

Single and dual output models with up to 210W output power
Exceptionally low ripple and noise
Front and rear panel output
List mode for executing up to 10 stored test sequences with a maximum of 150 steps in total
Overvoltage/overcurrent/overtemperature protection (OVP/OCP/OTP) and key-lock function
Fast transient response time of < 50 us for most models
Fast command processing time < 10 ms
Programmable voltage and current slew rates
Standard USB interface
4 optional types of modular interface cards add LAN and GPIB, Digital I/O and Analog Control, RS485, or RS232 functionality
LabVIEW (TM) drivers available
Model 9171B B&K Precision

The post 9171B appeared first on RN Embedded Solutions.

9242

admin — Mon, 25 Mar 2024 07:09:34 +0000

The 9240 Model 9242 B&K Precision Series sets a new standard for general purpose DC power supplies by including many features and capabilities found in high performance instruments as standard. Multi-range operation provides up to 200 W of clean output power in a compact 2U form factor.

These power supplies combine an easy-to-use interface with advanced list programming features, battery charge mode, and data logging to serve a wide range of applications including production test, R&D, electronic service, and education.

Isolated and floating output with front panel remote sense
Up to 120 W or 200 W of multi-range power in compact 2U half-rack form factor
Low output ripple and noise down to 1 mVrms
Advanced and easy to use list mode programming
Battery charge function with configurable stop conditions
Direct data logging to USB flash drive
Thermostatically-controlled fans for quiet operation
Adjustable voltage and current slew rates
OVP, OCP, OTP, and key-lock protections
USB (USBTMC-compliant) and LXI compliant LAN standard, GPIB option
LabVIEWTM, IVI-C, and IVI.NET drivers provided
Operating software included
cTUVus certification mark
Model 9242 B&K Precision

The post 9242 appeared first on RN Embedded Solutions.

9173B

admin — Mon, 25 Mar 2024 06:47:34 +0000

The 9170B/9180B Model 9173B B&K Precision series programmable DC power supplies deliver clean, stable and precise output power due to the supplies’ exceptionally low ripple and noise, low temperature coefficient, excellent regulation and fast transient response time characteristics.

Single and dual output models with up to 210W output power
Exceptionally low ripple and noise
Front and rear panel output
List mode for executing up to 10 stored test sequences with a maximum of 150 steps in total
Overvoltage/overcurrent/overtemperature protection (OVP/OCP/OTP) and key-lock function
Fast transient response time of < 50 us for most models
Fast command processing time < 10 ms
Programmable voltage and current slew rates
Standard USB interface
4 optional types of modular interface cards add LAN and GPIB, Digital I/O and Analog Control, RS485, or RS232 functionality
LabVIEW (TM) drivers available
Model 9173B B&K Precision

The post 9173B appeared first on RN Embedded Solutions.