USB Archives - RN Embedded Solutions https://rnembedded.com/interface/usb/ Tue, 23 Apr 2024 06:51:27 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.2 https://rnembedded.com/wp-content/uploads/2024/06/cropped-cropped-Embedded-Solutions-2-removebg-preview-32x32.png USB Archives - RN Embedded Solutions https://rnembedded.com/interface/usb/ 32 32 391B https://rnembedded.com/product/391b/ Mon, 01 Apr 2024 11:29:08 +0000 https://rnembedded.com/?post_type=product&p=3423 Model 391B
390B Series
True RMS Handheld Digital Multimeter 40,000-count
3 yr Warranty

[forminator_form id="4220"]

The post 391B appeared first on RN Embedded Solutions.

]]>

The 390B Series True RMS multimeters offer a comprehensive solution for general purpose measurement applications. Bundled with a complete set of accessories, these multimeters provide technicians and engineers with accurate results, data logging capabilities, and measurement features for evaluating a variety of electronics or electrical systems.

  • DCV, ACV, AC+DC, DCI, ACI, resistance, capacitance, frequency, diode, temperature, and continuity measurement functions
  • True RMS AC and AC+DC measurements
  • Bluetooth connectivity for live data monitoring and logging from a mobile device (Model 390B only)
  • Up to 100,000-count, dual display
  • dB, dBm, limits, peak-hold, REL (delta), MIN, MAX, and average math functions
  • HFR (High Frequency Rejection) mode applies a low pass filter for AC measurements (800 Hz cut-off)
  • Isolated USB interface with operating software for remote data logging
  • Dirt and water-resistant housing with rubberized protective case
  • CAT III 1000 V / CAT IV 600 V protection

The post 391B appeared first on RN Embedded Solutions.

]]> 2831E https://rnembedded.com/product/2831e/ Mon, 01 Apr 2024 11:24:49 +0000 https://rnembedded.com/?post_type=product&p=3420 Model 2831E
2831E and 5491B
4 1/2 Digit True RMS Bench Digital Multimeter
1 yr Warranty

[forminator_form id="4213"]

The post 2831E appeared first on RN Embedded Solutions.

]]> The 2831E and 5491B are versatile and dependable bench-top digital multimeters suitable for applications in education, service & repair and manufacturing requiring basic and reliable measurements. Additionally, these multimeters enhance your productivity with built-in math functions and USB connectivity, features not found in other bench meters in this price category.

The meters take typical multimeter measurements such as volts, ohms, and amps with great accuracy and stability and were designed for cost conscious users requiring a basic and dependable meter with a broad range of extra features offered at a value price.

  • Up to 50,000 count display resolution
  • Basic VDC accuracy of 0.02% for the 5491B and 0.03% for the 2831E
  • Dual display to indicate two measurements simultaneously
  • AC + DC True RMS
  • Up to 25 readings per second measurement rate
  • Built-in math functions: Rel, Max/Min, dBm, dB, %, Hold, Compare
  • CATI (1000 V)/CATII (300 V) protection
  • USB and RS232 (5491B only) interface
  • SCPI compatible
  • Rack-mountable with available accessory

The post 2831E appeared first on RN Embedded Solutions.

]]> 390B https://rnembedded.com/product/390b/ Mon, 01 Apr 2024 11:01:34 +0000 https://rnembedded.com/?post_type=product&p=3415 Model 390B
390B Series
True RMS Handheld Digital Multimeter with Bluetooth
3 yr Warranty

[forminator_form id="4219"]

The post 390B appeared first on RN Embedded Solutions.

]]>

The 390B Series True RMS multimeters offer a comprehensive solution for general purpose measurement applications. Bundled with a complete set of accessories, these multimeters provide technicians and engineers with accurate results, data logging capabilities, and measurement features for evaluating a variety of electronics or electrical systems.

  • DCV, ACV, AC+DC, DCI, ACI, resistance, capacitance, frequency, diode, temperature, and continuity measurement functions
  • True RMS AC and AC+DC measurements
  • Bluetooth connectivity for live data monitoring and logging from a mobile device (Model 390B only)
  • Up to 100,000-count, dual display
  • dB, dBm, limits, peak-hold, REL (delta), MIN, MAX, and average math functions
  • HFR (High Frequency Rejection) mode applies a low pass filter for AC measurements (800 Hz cut-off)
  • Isolated USB interface with operating software for remote data logging
  • Dirt and water-resistant housing with rubberized protective case
  • CAT III 1000 V / CAT IV 600 V protection

The post 390B appeared first on RN Embedded Solutions.

]]> 393B https://rnembedded.com/product/393b/ Mon, 01 Apr 2024 10:55:35 +0000 https://rnembedded.com/?post_type=product&p=3410 Model 393B
390B Series
True RMS Handheld Digital Multimeter 100,000-count
3 yr Warranty

[forminator_form id="4222"]

The post 393B appeared first on RN Embedded Solutions.

]]>

The 390B Series True RMS multimeters offer a comprehensive solution for general purpose measurement applications. Bundled with a complete set of accessories, these multimeters provide technicians and engineers with accurate results, data logging capabilities, and measurement features for evaluating a variety of electronics or electrical systems.

  • DCV, ACV, AC+DC, DCI, ACI, resistance, capacitance, frequency, diode, temperature, and continuity measurement functions
  • True RMS AC and AC+DC measurements
  • Bluetooth connectivity for live data monitoring and logging from a mobile device (Model 390B only)
  • Up to 100,000-count, dual display
  • dB, dBm, limits, peak-hold, REL (delta), MIN, MAX, and average math functions
  • HFR (High Frequency Rejection) mode applies a low pass filter for AC measurements (800 Hz cut-off)
  • Isolated USB interface with operating software for remote data logging
  • Dirt and water-resistant housing with rubberized protective case
  • CAT III 1000 V / CAT IV 600 V protection

The post 393B appeared first on RN Embedded Solutions.

]]> 5491B https://rnembedded.com/product/5491b/ Mon, 01 Apr 2024 10:49:24 +0000 https://rnembedded.com/?post_type=product&p=3405 Model 5491B
2831E and 5491B
50,000 Count True RMS Bench Digital Multimeter
3 yr Warranty

[forminator_form id="4228"]

The post 5491B appeared first on RN Embedded Solutions.

]]> The 2831E and 5491B are versatile and dependable bench-top digital multimeters suitable for applications in education, service & repair and manufacturing requiring basic and reliable measurements. Additionally, these multimeters enhance your productivity with built-in math functions and USB connectivity, features not found in other bench meters in this price category.

The meters take typical multimeter measurements such as volts, ohms, and amps with great accuracy and stability and were designed for cost conscious users requiring a basic and dependable meter with a broad range of extra features offered at a value price.

  • Up to 50,000 count display resolution
  • Basic VDC accuracy of 0.02% for the 5491B and 0.03% for the 2831E
  • Dual display to indicate two measurements simultaneously
  • AC + DC True RMS
  • Up to 25 readings per second measurement rate
  • Built-in math functions: Rel, Max/Min, dBm, dB, %, Hold, Compare
  • CATI (1000 V)/CATII (300 V) protection
  • USB and RS232 (5491B only) interface
  • SCPI compatible
  • Rack-mountable with available accessory

The post 5491B appeared first on RN Embedded Solutions.

]]> 394B https://rnembedded.com/product/394b/ Mon, 01 Apr 2024 10:25:35 +0000 https://rnembedded.com/?post_type=product&p=3400 Model 394B
390B Series
Process Multimeter
3 yr Warranty

[forminator_form id="4223"]

The post 394B appeared first on RN Embedded Solutions.

]]>

The 390B Series True RMS multimeters offer a comprehensive solution for general purpose measurement applications. Bundled with a complete set of accessories, these multimeters provide technicians and engineers with accurate results, data logging capabilities, and measurement features for evaluating a variety of electronics or electrical systems.

  • DCV, ACV, AC+DC, DCI, ACI, resistance, capacitance, frequency, diode, temperature, and continuity measurement functions
  • True RMS AC and AC+DC measurements
  • Bluetooth connectivity for live data monitoring and logging from a mobile device (Model 390B only)
  • Up to 100,000-count, dual display
  • dB, dBm, limits, peak-hold, REL (delta), MIN, MAX, and average math functions
  • HFR (High Frequency Rejection) mode applies a low pass filter for AC measurements (800 Hz cut-off)
  • Isolated USB interface with operating software for remote data logging
  • Dirt and water-resistant housing with rubberized protective case
  • CAT III 1000 V / CAT IV 600 V protection

The post 394B appeared first on RN Embedded Solutions.

]]> 5492C https://rnembedded.com/product/5492c/ Mon, 01 Apr 2024 10:20:59 +0000 https://rnembedded.com/?post_type=product&p=3398 Model 5492C
5490C Series
5 1/2 Bench Digital Multimeter
3 yr Warranty

[forminator_form id="4229"]

The post 5492C appeared first on RN Embedded Solutions.

]]> The 5490C Series 5½ and 6½-digit bench multimeters are designed for accuracy, repeatability and ease-of-use. A wide measurement range with speeds up to 1000 readings per second, and a basic DCV accuracy up to 35 ppm deliver stable measurement results quickly and accurately. These general purpose meters are well suited for demanding engineering, production and service applications.

The intuitive 4.3-inch LCD offers a variety of measurement display modes including numeric, bar meter, trend chart, and histogram. The built-in math functions, statistics display, and dual measurement capabilities offer convenient ways to capture and analyze measurement data.

  • 12 measurement functions: DCV, ACV, DCI, ACI, 2 and 4-wire resistance, capacitance, frequency, diode, temperature, continuity test, DCV ratio
  • High-contrast 4.3-inch full color LCD
  • Measurement speed up to 1000 readings/s
  • DCV basic accuracy up to 35 ppm (0.0035%)
  • Histogram, bar graph, trend chart, and numeric display options
  • Display Min, Max, Peak-to-Peak, Average, Standard Deviation statistics simultaneously
  • Null, dB, dBm, %, mx+b, and run/stop math functions
  • AC frequency measurements to 1MHz
  • Internal storage buffer for up to 10,000 readings
  • 2 and 4-wire resistance measurements down to 10 Ω
  • Dual measurement display
  • Rear input terminals for rack use (6 ½-digit model only)
  • Standard USB (USBTMC-compliant), LAN, and RS232 interfaces, supporting SCPI commands. GPIB option
  • Front panel USB host port to export measurements, screen captures and save/recall settings
  • LabVIEWTM driver and operating software for remote instrument control, measurement monitoring, and data logging included

The post 5492C appeared first on RN Embedded Solutions.

]]> 5492CGPIB https://rnembedded.com/product/5492cgpib/ Mon, 01 Apr 2024 10:11:06 +0000 https://rnembedded.com/?post_type=product&p=3393 Model 5492CGPIB
5490C Series
5 1/2 Bench Digital Multimeter with GPIB
3 yr Warranty

[forminator_form id="4230"]

The post 5492CGPIB appeared first on RN Embedded Solutions.

]]> The 5490C Series 5½ and 6½-digit bench multimeters are designed for accuracy, repeatability and ease-of-use. A wide measurement range with speeds up to 1000 readings per second, and a basic DCV accuracy up to 35 ppm deliver stable measurement results quickly and accurately. These general purpose meters are well suited for demanding engineering, production and service applications.

The intuitive 4.3-inch LCD offers a variety of measurement display modes including numeric, bar meter, trend chart, and histogram. The built-in math functions, statistics display, and dual measurement capabilities offer convenient ways to capture and analyze measurement data.

  • 12 measurement functions: DCV, ACV, DCI, ACI, 2 and 4-wire resistance, capacitance, frequency, diode, temperature, continuity test, DCV ratio
  • High-contrast 4.3-inch full color LCD
  • Measurement speed up to 1000 readings/s
  • DCV basic accuracy up to 35 ppm (0.0035%)
  • Histogram, bar graph, trend chart, and numeric display options
  • Display Min, Max, Peak-to-Peak, Average, Standard Deviation statistics simultaneously
  • Null, dB, dBm, %, mx+b, and run/stop math functions
  • AC frequency measurements to 1MHz
  • Internal storage buffer for up to 10,000 readings
  • 2 and 4-wire resistance measurements down to 10 Ω
  • Dual measurement display
  • Rear input terminals for rack use (6 ½-digit model only)
  • Standard USB (USBTMC-compliant), LAN, and RS232 interfaces, supporting SCPI commands. GPIB option
  • Front panel USB host port to export measurements, screen captures and save/recall settings
  • LabVIEWTM driver and operating software for remote instrument control, measurement monitoring, and data logging included

The post 5492CGPIB appeared first on RN Embedded Solutions.

]]> 5493C https://rnembedded.com/product/5493c/ Mon, 01 Apr 2024 10:05:09 +0000 https://rnembedded.com/?post_type=product&p=3388 Model 5493C
5490C Series
6 1/2 Bench Digital Multimeter
3 yr Warranty

The post 5493C appeared first on RN Embedded Solutions.

]]> The 5490C Series 5½ and 6½-digit bench multimeters are designed for accuracy, repeatability and ease-of-use. A wide measurement range with speeds up to 1000 readings per second, and a basic DCV accuracy up to 35 ppm deliver stable measurement results quickly and accurately. These general purpose meters are well suited for demanding engineering, production and service applications.

The intuitive 4.3-inch LCD offers a variety of measurement display modes including numeric, bar meter, trend chart, and histogram. The built-in math functions, statistics display, and dual measurement capabilities offer convenient ways to capture and analyze measurement data.

  • 12 measurement functions: DCV, ACV, DCI, ACI, 2 and 4-wire resistance, capacitance, frequency, diode, temperature, continuity test, DCV ratio
  • High-contrast 4.3-inch full color LCD
  • Measurement speed up to 1000 readings/s
  • DCV basic accuracy up to 35 ppm (0.0035%)
  • Histogram, bar graph, trend chart, and numeric display options
  • Display Min, Max, Peak-to-Peak, Average, Standard Deviation statistics simultaneously
  • Null, dB, dBm, %, mx+b, and run/stop math functions
  • AC frequency measurements to 1MHz
  • Internal storage buffer for up to 10,000 readings
  • 2 and 4-wire resistance measurements down to 10 Ω
  • Dual measurement display
  • Rear input terminals for rack use (6 ½-digit model only)
  • Standard USB (USBTMC-compliant), LAN, and RS232 interfaces, supporting SCPI commands. GPIB option
  • Front panel USB host port to export measurements, screen captures and save/recall settings
  • LabVIEWTM driver and operating software for remote instrument control, measurement monitoring, and data logging included

The post 5493C appeared first on RN Embedded Solutions.

]]> 5493CGPIB https://rnembedded.com/product/5493cgpib/ Mon, 01 Apr 2024 09:41:07 +0000 https://rnembedded.com/?post_type=product&p=3383 Model 5493CGPIB
5490C Series
6 1/2 Bench Digital Multimeter with GPIB
3 yr Warranty

The post 5493CGPIB appeared first on RN Embedded Solutions.

]]>

The 5490C Series 5½ and 6½-digit bench multimeters are designed for accuracy, repeatability and ease-of-use. A wide measurement range with speeds up to 1000 readings per second, and a basic DCV accuracy up to 35 ppm deliver stable measurement results quickly and accurately. These general purpose meters are well suited for demanding engineering, production and service applications.

The intuitive 4.3-inch LCD offers a variety of measurement display modes including numeric, bar meter, trend chart, and histogram. The built-in math functions, statistics display, and dual measurement capabilities offer convenient ways to capture and analyze measurement data.

  • 12 measurement functions: DCV, ACV, DCI, ACI, 2 and 4-wire resistance, capacitance, frequency, diode, temperature, continuity test, DCV ratio
  • High-contrast 4.3-inch full color LCD
  • Measurement speed up to 1000 readings/s
  • DCV basic accuracy up to 35 ppm (0.0035%)
  • Histogram, bar graph, trend chart, and numeric display options
  • Display Min, Max, Peak-to-Peak, Average, Standard Deviation statistics simultaneously
  • Null, dB, dBm, %, mx+b, and run/stop math functions
  • AC frequency measurements to 1MHz
  • Internal storage buffer for up to 10,000 readings
  • 2 and 4-wire resistance measurements down to 10 Ω
  • Dual measurement display
  • Rear input terminals for rack use (6 ½-digit model only)
  • Standard USB (USBTMC-compliant), LAN, and RS232 interfaces, supporting SCPI commands. GPIB option
  • Front panel USB host port to export measurements, screen captures and save/recall settings
  • LabVIEWTM driver and operating software for remote instrument control, measurement monitoring, and data logging included

The post 5493CGPIB appeared first on RN Embedded Solutions.

]]>