Description
CODESYS J1939 SL implements J1939 functionality on a CODESYS controller and enables receiving and sending of parameter groups. The fieldbus stack can be downloaded dynamically together with the IEC application. CODESYS J1939 editor pages offer an easy way to parameterize the J1939 communication.
Requirements
Programming system | CODESYS Development System V3.5.17.0 or higher |
Runtime system | CODESYS Control V3 |
Supported platforms/devices | Note: Use the project “Device Reader” to find out the supported features of your device. “Device Reader” is available for free in the CODESYS Store. |
Additional requirements | CODESYS Control runtime system on the device with component “CmpCAACanL2” |
Restrictions | - |
Licensing |  Single Device License: The license can be used on the target device/PLC on which the CODESYS Runtime System is installed. Licenses are activated on a software-based license container (soft container), which is permanently connected to the controller. Alternatively the license can be stored on a CODESYS Key (USB-Dongle). By replugging the CODESYS Key, the license can be used on any other controller. |
Required Accessory | Optional: CODESYS Key |
